Business, Free News Articles, Manufacturing

Getec Industries Achieved Record-Breaking Growth in 2020

TORRANCE, Calif. -- The COVID-19 pandemic has devastated businesses all over the country. Despite this hostile business climate, Getec Industrial's business grew by 28%. This was due to several actions taken by executive leadership this year.

Getec Industrial implemented strict policies and procedures to control the workplace from COVID-19 to protect customers, suppliers, and employees.

These measures included:
* Frequently clean and sanitize all work surfaces, equipment, and vehicles throughout the workday to reduce the virus's spread.
* Monitor all employees, vendors, and customers for visible symptoms of COVID-19 and take the temperature of all employees before starting each work shift.
* Mandating that all employees wear face shields and face masks while on the premises.
* Limit access to offices and facilities to all non-essential employees, vendors, and other visitors during the outbreak.
* Encourage all employees to follow social distancing practices to keep all workers at least six feet apart to the extent possible.
* Wipe down all boxes and shipments coming in and out of our facilities with an approved alcohol solution to limit the spread of the virus.

Because of the successful implementation of these policies and procedures, Getec reports 0 cases of COVID-19 at any of their worldwide offices.

Another major factor contributing to the company's success in 2020 is Getec's increased presence on social media. Zach Caltogirone has been promoted to the role of Social Media Director, which amplified Getec's visibility in the industry and attracted new customers. As a result, Getec landed new clients in the aerospace and networking industries.

"With all of the chaos going on in the world's economy right now, we have been blessed with our success this year," says Hart Cardozo III, COO of Getec Industries. "We attribute this success to the hard work of our entire team, who stayed focused during these difficult times. We hope to build upon this success in 2021."

ABOUT GETEC INDUSTRIAL

Getec Industrial's North America is the industry-leading, full-service provider of turnkey manufacturing. Our services include aluminum extrusion, die casting, CNC machining, metal stamping, plating, assembly, and packaging. We have a broad product line and offer solutions for nearly every thermal management and CNC machining need - from the most complicated solutions to the simplest. We take pride in providing our customers with on-time delivery of turnkey manufacturing, high-quality products that meet and exceed our customer's expectations. http://www.getecna.com

Related link: http://www.getecna.com/

This news story was published by the Neotrope® News Network - all rights reserved.

Business, Free News Articles, Manufacturing

Getec Industries is Operating at Full Capacity During the COVID-19 Pandemic

TORRANCE, Calif. -- Getec Industrial is proud to announce that they are operating at full capacity. "We are 100% open for business, and we have enacted several new policies in accordance with CDC guidelines in response to the COVID-19 outbreak," says Hart Cardozo III, COO of Getec Industries.

Getec Industrial has enacted the following policies to ensure the safety of our customers, employees, and their families:

* Frequently clean and sanitize all work surfaces, equipment and vehicles throughout the workday to reduce the spread of the virus.

* Monitor all employees, vendors, and customers for visible symptoms of COVID-19 as well as take the temperature of all employees before starting each work shift.

* Limit access to offices and facilities to all non-essential employees, vendors, and other visitors during the outbreak.

* Encourage all employees follow social distancing practices to keep all workers at least six feet apart to the extent possible.

* Wipe down all boxes and shipments coming in and out of our facilities with an approved alcohol solution to limit the spread of the virus.

"At this time, no Getec employees have tested positive for COVID-19," says Cardozo. "We understand the need for caution during this difficult time, as we supply the essential thermal management solutions for electronic components while still keeping our customers and employees safe."

ABOUT GETEC INDUSTRIAL

Getec Industrial's North America is the industry leading, full-service provider of turnkey manufacturing. Our services include aluminum extrusion, die casting, CNC machining, metal stamping, plating and assembly and packaging. We have a broad product line and offer solutions for nearly every thermal management and CNC machining need - from the most complicated solutions to the simplest. We take pride in providing our customers with on time delivery of turnkey manufacturing, high quality products that both meet and exceed our customer's expectations.

Learn more: http://www.getecna.com

Related link: http://www.getecna.com/

This news story was published by the Neotrope® News Network - all rights reserved.

Business, Electronics, Free News Articles, Manufacturing

Getec Industrial Offers Expanded Thermal Management Solutions for 2020

TORRANCE, Calif. -- Getec Industrial had a great year in 2019. Getec's Thermal Management Solutions Division has seen a 72% increase in sales and growth in 2019. "Getec has added many new customers with our innovative approach to the electronics thermal solutions market," said Hart Cardozo III, COO of Getec Industrial. "And 2020 is looking even better."

To prepare for 2020, Getec's Thermal Management Solutions Division has hit the ground running by upgrading its computerized workstations with state-of-the-art CAD software, and has added 12 new CNC milling machines to expand production. Getec has also recently added friction stir welding services to the Thermal Management Solutions Division, providing customers with an inexpensive option when it comes to manufacturing large extruded aluminum heat sinks (12, 20 or 30 inches or even wider).

Learn more: https://getecna.com/thermal-management-solutions-division/

Why Manufacturing Large Extruded Aluminum Heat Sinks is a Challenge

There are very few 36-inch extrusion presses in the world, and a limited number of 20- and 30-inch ones as well, which keeps the production cost for manufacturing large heat sinks very high. These larger aluminum extrusion presses require a 10 to 20-metric ton minimum run, and the cost of tooling a large extrusion press can range anywhere from $40K to $90K. This makes the cost of large, one-piece extruded aluminum heat sinks extremely cost prohibitive for most companies.

Why Friction Stir Welding is Better

This process joins two surfaces together using a rotating mechanical tool that fuses the surfaces of two smaller heat sinks together seamlessly. So instead of paying the huge production and tooling overhead costs for a 36-inch extruded aluminum heat sink, Getec Industrial can stir weld three 12-inch heat sinks together to create one seamless 36-inch heat sink with identical performance at a fraction of the cost.

"We welcome the thermal management challenges provided by today's electronics marketplace," said Cardozo. "We believe that combining our workstation updates and additional CNC capacity with our friction stir welding services allows Getec to continue engineering creative thermal solutions for the new year of 2020 and beyond."

For more information about Getec Industrial's new Thermal Solutions Division offerings just fill out our handy contact form on our website, or give us a call at (888) 999-8499.

ABOUT GETEC INDUSTRIAL

Getec Industrial's North America is the industry leading, full-service provider of turnkey manufacturing. Our services include aluminum extrusion, die casting, CNC machining, metal stamping, plating and assembly and packaging. We have a broad product line and offer solutions for nearly every thermal management and CNC machining need - from the most complicated solutions to the simplest. We take pride in providing our customers with on time delivery of turnkey manufacturing, high quality products that both meet and exceed our customer's expectations.

Learn more at: https://getecna.com/

Related link: http://www.getecna.com/

This news story was published by the Neotrope® News Network - all rights reserved.

Business, Free News Articles, Manufacturing

Getec Industries Announces the Addition of Stir Welding Services to Its Thermal Solutions Division

TORRANCE, Calif. -- Getec Industries is proud to announce that has added stir welding services as part of its suite of thermal management solutions, and has been added as part of the Thermal Solutions division.

Today's complex electronic components run faster than ever, and this increased speed generates heat-a lot of it-and this often requires innovative solutions for heat dissipation in these electronic devices. One of these solutions is the creation of large extruded aluminum heat sinks that are 20 or 30 inches or even larger.

The problem is that there are very few 36-inch extrusion presses in the world, and a limited number of 20 and 30-inch extrusion presses. Using these larger extrusion presses require a 10 to 20 metric ton minimum run, and the cost of tooling for a large extrusion press can range anywhere from $40,000.00-$90,000.00. This makes the extrusion of a large, one-piece aluminum heat sinks unaffordable for most businesses.

The process of friction stir welding joins two surfaces together using a rotating mechanical tool that fuses the surfaces of two smaller heat sinks together seamlessly. For example, Getec Industrial can stir weld three 12-inch heat sinks together to create one seamless 36-inch heat sink at a fraction of the cost of producing a one-piece 36-inch heat sink.

By using this new equipment and technology, friction stir welding offers an affordable alternative that produces heat dissipation performance of a large heat sink without the prohibitive die tooling and large minimum metric ton runs associated with large extrusion presses.

"By adding stir welding services to our Thermal Solutions division, Getec Industrial can fabricate extruded aluminum heat sinks as wide as you need," according to Hart Cardozo III, COO of Getec Industries. "This option will substantially cut costs for our customers who require these types of thermal management solutions for their products, and save them a lot of manufacturing lead time and production headaches."

For more information about Getec Industrial's friction stir welding process just fill out our handy contact form on our website, or give us a call at (888) 999-8499 - https://getecna.com/contact/.

ABOUT GETEC INDUSTRIAL:

Getec Industrial's North America is the industry leading, full-service provider of turnkey manufacturing. Our services include aluminum extrusion, die casting, CNC machining, metal stamping, plating and assembly and packaging. We have a broad product line and offer solutions for nearly every thermal management and CNC machining need - from the most complicated solutions to the simplest. We take pride in providing our customers with on time delivery of turnkey manufacturing, high quality products that both meet and exceed our customer's expectations. Learn more at: https://getecna.com/.

*(LOGO 72dpi: https://getecna.com/wp-content/themes/getec/images/logo.png)

Related link:

This news story was published by the Neotrope® News Network - all rights reserved.

Advertising and Marketing, Business, Free News Articles, Manufacturing

Getec Industrial Announces the Launch of Its Redesigned Website

TORRANCE, Calif. -- Getec Industrial announces the launch of its redesigned website. The site has been updated with a new look and feel that incorporates the latest features of online web design, as well as optimizing the site for mobile devices such as phones and tablets.

The site now features a simple online contact/quote form that can be conveniently accessed on just about every page of the website. Another new feature of the site is a dedicated area for videos about Getec Industrial, its products and its processes.

The site has an all new look and feel with colorful graphics, an easy-to-use menu navigation, and accessible information about all of Getec's goods and services.

"This new design does a better job showing off our various thermal management products and capabilities," says Hart Cardozo III, Senior Vice President of Logistics and Accounts. "The site also shows you why Getec is your go-to resource when it comes to turnkey thermal solutions manufacturing."

The site also provides details about Getec Industrial's commitment to quality through their RoHS compliance and their ISO:2015 Certification, including Getec's quality management principles to help guarantee a positive customer experience.

Be sure to check out the new Getec Industrial website design at http://www.getecna.com/.

ABOUT GETEC INDUSTRIAL:

Getec Industrial North America is the industry leading, full service provider of turnkey manufacturing. Our services include aluminum extrusion, die casting, CNC machining, metal stamping, plating and assembly and packaging. We have a broad product line and offer solutions for nearly every thermal management and CNC machining need - from the most complicated solutions to the simplest.

We take pride in providing our customers with on time delivery of turnkey manufacturing, high quality products that both meet and exceed our customer's expectations.

VIDEO (YouTube): https://youtu.be/23b7cjbWG1o

Related link:

This news story was published by the Neotrope® News Network - all rights reserved.

Advertising and Marketing, Business, Free News Articles, Manufacturing

Getec Industrial Announces the Launch of Its Redesigned Website

TORRANCE, Calif. -- Getec Industrial announces the launch of its redesigned website. The site has been updated with a new look and feel that incorporates the latest features of online web design, as well as optimizing the site for mobile devices such as phones and tablets.

The site now features a simple online contact/quote form that can be conveniently accessed on just about every page of the website. Another new feature of the site is a dedicated area for videos about Getec Industrial, its products and its processes.

The site has an all new look and feel with colorful graphics, an easy-to-use menu navigation, and accessible information about all of Getec's goods and services.

"This new design does a better job showing off our various thermal management products and capabilities," says Hart Cardozo III, Senior Vice President of Logistics and Accounts. "The site also shows you why Getec is your go-to resource when it comes to turnkey thermal solutions manufacturing."

The site also provides details about Getec Industrial's commitment to quality through their RoHS compliance and their ISO:2015 Certification, including Getec's quality management principles to help guarantee a positive customer experience.

Be sure to check out the new Getec Industrial website design at http://www.getecna.com/.

ABOUT GETEC INDUSTRIAL:

Getec Industrial North America is the industry leading, full service provider of turnkey manufacturing. Our services include aluminum extrusion, die casting, CNC machining, metal stamping, plating and assembly and packaging. We have a broad product line and offer solutions for nearly every thermal management and CNC machining need - from the most complicated solutions to the simplest.

We take pride in providing our customers with on time delivery of turnkey manufacturing, high quality products that both meet and exceed our customer's expectations.

VIDEO (YouTube): https://youtu.be/23b7cjbWG1o

Related link:

This news story was published by the Neotrope® News Network - all rights reserved.