Electronics, Telecommunications and VoIP

Protium Technologies Shipping Advanced SIGINT Tuner

Author: Protium Technologies, Inc.
Dateline: Northborough, Massachusetts (NORTHBOROUGH, Mass.)  | Tue, 15 Mar 2011

freeNewsArticles Story Summary: “After several years of intensive technical development, Protium Technologies, Inc. is shipping the P6010 tuner, an advanced yet inexpensive component from the company's growing SIGINT receiver product line. The SDR/FPGA-based modular design covers the 20-6,000 MHz frequency range in a small brick package specifically designed for cost-sensitive tactical applications.”



A R T I C L E:

After several years of intensive technical development, Protium Technologies, Inc. is shipping the P6010 tuner, an advanced yet inexpensive component from the company's growing SIGINT receiver product line. The SDR/FPGA-based modular design covers the 20-6,000 MHz frequency range in a small brick package specifically designed for cost-sensitive tactical applications.

In the words of Rick Gawlik, president of Protium Technologies, "The design goal of high performance at low cost was met very successfully and positions the product line well ahead of existing solutions. The modular nature of the baseline design permits ready adaptation to a wide range of rapidly-evolving customer requirements."

According to Mike Vinskus, Senior Principal Engineer at TriaSys Technologies in Chelmsford, Massachusetts, "The novel architecture of the P6010 tuner enables flexibility and performance not found in other tuners currently in the marketplace."

The P6010 tuner features full preselection, low noise figure, high third-order IP, any frequency-to-any-frequency tune time of less than 70 usec. (in-band tune time of 1 usec.), selectable 70 and 140 MHz IF outputs with 20 or 40 MHz bandwidths and standard USB control. The P6010's IF output center frequency can also be selected via software to any frequency between 60 and 145 MHz. An innovative MGC/AGC technique provides a true gain control range of 120 dB. The unit consumes less than 10 watts and can be powered by any 9-32 VDC source. Size is 3.0 inches x 6.0 inches x 0.75 inches and weight is 10.4 ounces.

Single-unit price is under $13,000 and less than $10,000 in production quantities. Delivery is 12 weeks ARO. Demonstration units are available for evaluation.

The company's P6020 tuner-digitizer will be introduced in the third quarter of 2011. It features 20 and 40 MHz-bandwidth I and Q outputs over a 1 GigE interface in the same small brick package. Both the P6010 and the P6020 will also be available in a single-slot 3U CompactPCI package. Additionally, the 3U units can be configured for a VPX backplane.

Protium Technologies, Inc. is committed to provide the SIGINT community with highest value products and customer service second to none.

About Protium Technologies, Inc.:

Protium Technologies, Inc. (www.protiumtechnologies.com) is a developer and manufacturer of commercial and military digital R.F. and microwave telecommunications subsystems. The company has extensive experience in developing and manufacturing communications equipment operating in the frequency range of a few MHz to 60 GHz. Current activities are centered on developing and manufacturing a line of platforms for software-defined radios and a product line for U.S. Government SIGINT applications.

Protium Technologies, Inc., located in Northborough, MA, was founded in 2003 and is owned by the management team.

###


Copyright © 2011 by Protium Technologies, Inc. and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

• Web Image (72dpi): https://www.send2press.com/mediaboom/11-0315-prot6010_72dpi.jpg

Story Title: Protium Technologies Shipping Advanced SIGINT Tuner
• REFERENCE KEYWORDS/TERMS: P6010 SIGINT Tuner, Northborough, Massachusetts, Government SIGINT applications, Telecommunications and VoIP, Electronics, Military, NORTHBOROUGH, Mass..

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (Protium Technologies, Inc.); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Tue, 15 Mar 2011 11:59:40 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Business, Electronics, Manufacturing

AAI Releases Solid State Purge Controller

Author: Applied Analytics, Inc.
Dateline: Concord, Massachusetts (CONCORD, Mass.)  | Thu, 20 Jan 2011

freeNewsArticles Story Summary: “Today, Applied Analytics, Inc. (AAI) unveils the ePurge X, a next-generation solution for air-purging electronic enclosures. Unlike conventional purge controllers, this new offering is entirely solid state and much more in line with the design of AAI's highly automated process analyzers.”



A R T I C L E:

Today, Applied Analytics, Inc. (AAI) unveils the ePurge X, a next-generation solution for air-purging electronic enclosures. Unlike conventional purge controllers, this new offering is entirely solid state and much more in line with the design of AAI's highly automated process analyzers. The ePurge X is slated to be available both to distributors and the general public in March.

"When you glance through the brochure, you'll immediately notice the form factor," says Andy Burgess, senior mechanical engineer, AAI. "The ePurge X has an ultra-slim profile that barely protrudes from the surface of the enclosure. It also has half as many components to install as the purges that are currently available."

AAI is also introducing an entirely new concept with the utility-saving feedback feature. The ePurge X uses a digital mass flow sensor to monitor the flow rate of purge gas through the enclosure. Along with the differential pressure, this flow value allows the ePurge X to provide data on instrument air consumption by specifying the exact demand that will keep the enclosure safely pressurized without wasting any extra utilities.

"In an industry of safety devices that have no inherent return on investment, we are offering a product that can pay for itself within five years in utility savings alone," says Yoav Barshad, President, AAI. "Writ large across all the air-purged enclosures in a typical industrial site, this is nothing less than a killer feature."

The ePurge product family will be used with all future purged systems from AAI. Adds Burgess: "We were compelled to develop the ePurge X when we could not find a purge solution for our own analyzer enclosures that didn't compromise the original system's form factor or complicate installation. There must be many manufacturers that, like AAI, carry high expectations for safety components. We are our own customer, and we witness the ePurge X exceed those expectations each day of production."

For additional information about the ePurge X, visit www.a-a-inc.com/epurgex .

###


Copyright © 2011 by Applied Analytics, Inc. and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

• Web Image (72dpi): https://www.send2press.com/mediaboom/11-0120-epurge_72dpi.jpg

Story Title: AAI Releases Solid State Purge Controller
• REFERENCE KEYWORDS/TERMS: ePurge X, Concord, Massachusetts, air-purging electronic enclosures, Electronics, Business, Manufacturing, CONCORD, Mass..

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (Applied Analytics, Inc.); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Thu, 20 Jan 2011 23:47:17 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Electronics, Music and Recording Industry

Music Computing Announces Next Generation Music Keyboard Workstations for Studio and Live Performance: StudioBLADE and iKeyDOCK

Author: Music Computing, Inc.
Dateline: Austin, Texas (AUSTIN, Texas)  | Tue, 09 Nov 2010

freeNewsArticles Story Summary: “Music Computing, Inc. today announced their brand new line of keyboard workstations for both gigging musicians and any size recording studio, are now shipping. The StudioBLADE and iKeyDOCK are complete, portable production stations, which either include a built-in Windows 7 64-bit PC with touch-screen and DAW software and virtual software instruments, or a docking system for any PC/Mac notebook.”



A R T I C L E:

Music Computing, Inc. today announced their brand new line of keyboard workstations for both gigging musicians and any size recording studio, are now shipping. The StudioBLADE™ and iKeyDOCK™ are complete, portable production stations, which either include a built-in Windows® 7 64-bit PC with touch-screen and DAW software and virtual software instruments, or a docking system for any PC/Mac notebook.

About the Music Computing StudioBLADE:

The StudioBLADE™ series are complete music production workstations powered by Intel® processors and 64-bit Windows 7, and each model ships with a total studio package with DAW (digital audio workstation), virtual instruments, mastering effects, and utilities to customize the exclusive ControlDAW™ MIDI control surface. Support for 2 additional monitors allows for total workspace customization.

A powerful combination of hands-on control begins with the tilt and telescoping 10.1-inch touch panel (more than twice the size of most workstation screens), the high-quality 61-key synth action, or 88-key weighted piano action keyboard; and formidable ControlDAW interactive knobs, buttons, and sliders, managed by GeoMIDI™ mapping software.

The large 64-button grid control surface, in addition to knobs and sliders, is a powerful tool for musicians using grid-style programs like Ableton Live, or classic drum pad boxes like the Akai® MPC. Music Computing's TriggerGrid™ sample trigger player for drum pads turns the grid surface into a massive 64-pad virtual percussion instrument.

Each StudioBLADE also includes Studio One Pro from Presonus, a highly respected DAW solution complete with virtual instruments and mastering FX, plus 10GB of sounds. Music Computing's included SonicSource™ VSTi soft-synth contains thousands of sound presets providing a giant (8GB) starting point for both analog and digital textures.

"With remarkable audio processing capabilities like 'drag and drop mastering,' the StudioBLADE is one of the most powerful keyboard instruments ever built," said company CEO, Victor Wong. "At just 28 pounds and 36-inches in length, the 61-key version of the StudioBLADE is a truly portable all-in-one 'grab and go' solution for the gigging musician, or a home studio user with limited space."

Pricing starts at $2599 (US/SRP) for the 61-key Intel Core2 base configuration with 24/48 audio, 2 combo XLR and 1/4-inch mic inputs with phantom power, 2 balanced outs, and headphone jack. Optional upgrades include 24/96 audio and 8 inputs, more RAM, and internal hard drives, to suit the user's needs.

Complete StudioBLADE information and images: http://www.musiccomputing.com/studioblade .

About the Music Computing iKeyDOCK:

The innovative and first-to-market iKeyDOCK™ keyboard workstations are OS platform neutral and suitable for any musician already comfortable with using a Windows® OS, and/or Apple Mac® notebook. The iKeyDOCK line handily bridges the gap between a system that can easily be transported to gigs, be used as a full-time docking station for any home or commercial studio, and any combination of these situations.

Similar to the StudioBLADE series, minus the touch screen and internal PC, the iKeyDOCK provides a dockable solution for any notebook; simply plug-in and start playing. Like the StudioBLADE, a full-size 61-key synth-action style, or 88-key piano-style high-quality keyboard, audio and MIDI I/O, ControlDAW™ MIDI control surface, and performance software are all part of the package.

For gigging musicians, finally cut the wires of having a MIDI keyboard, MIDI interface, external hard drives, and notebook as separate elements. With the iKeyDOCK, you simply place any notebook up to 17-inch screen size into the docking section and make connections for USB or FireWire and you immediately have a full workstation that looks good on stage, and fits on all standard keyboard stands. At just 24 lbs. the iKeyDOCK is a truly portable system.

There is simply no other solution on the market that does what the iKeyDOCK from Music Computing can do - and it's affordably priced, starting at $1499 (US/SRP) with 24/48 audio, 2 combo XLR and 1/4-inch mic inputs with phantom power, 2 balanced outs, and headphone jack. Optional upgrades include 24/96 audio and 8 inputs. Optional internal 2.5-inch hard drives expand storage for notebooks to replace the need for external drives.

The iKeyDOCK may also be used with a desktop PC/Mac via 2xUSB or 1xUSB plus 1x FireWire, for maximum flexibility.

Complete iKeyDOCK information and images: http://www.musiccomputing.com/ikeydock .

About Music Computing, Inc.:

A fully U.S. based company with local just-in-time (JIT) manufacturing capability, Music Computing designs, develops, and supports its products in-house. Products can typically ship within 7 days of an order being placed.

Victor Wong, with more than 20 years of industry expertise, brings his computer music and electronics design and development prowess to Music Computing, Inc. His mission for the company is to invent new technologies and to integrate them with proven standards leading to the best possible instruments for musicians, educators, and studios.

For more information, visit: www.MusicComputing.com .

###


Copyright © 2010 by Music Computing, Inc. and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

• Web Image (72dpi): https://www.send2press.com/mediaboom/10-1109-musiccomp1_72dpi.jpg

Story Title: Music Computing Announces Next Generation Music Keyboard Workstations for Studio and Live Performance: StudioBLADE and iKeyDOCK
• REFERENCE KEYWORDS/TERMS: Music Computing StudioBLADE, Austin, Texas, Music Computing iKeyDOCK, Music and Recording Industry, Computing, Electronics, AUSTIN, Texas.

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (Music Computing, Inc.); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Tue, 09 Nov 2010 15:11:25 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Electronics, Health, Diet and Fitness

Green Smoke’s 2 Part E-Cigarette Designed to Meet Consumer Demand

Author: Green Smoke
Dateline: Miami, Florida (MIAMI, Fla.)  | Fri, 25 Jun 2010

freeNewsArticles Story Summary: “MIAMI, Fla. -- Since the concept was first developed almost seven years ago, Green Smoke has capitalized on advances in technology to develop its patented design and catapult the electronic cigarette into the global market, as consumer awareness and demand increases.”



A R T I C L E:

Since the concept was first developed almost seven years ago, Green Smoke has capitalized on advances in technology to develop its patented design and catapult the electronic cigarette into the global market, as consumer awareness and demand increases.

The electronic cigarette is a personal, battery-operated vaporizer that mimics traditional cigarettes offering smokers interested in switching an array of benefits.

When the product was first introduced, it generally had heavy batteries that did not hold a charge well. The shape and design resembled that of a pen with a slick plastic surface. The quality and consistency of the smoke volume and nicotine delivery system also varied. Moreover, every time users wanted to refill their e cigarettes they had to juggle several small components, including the atomizer (the part of the device that produces the vapor), a liquid nicotine solution, the battery, and other mouth piece components.

While many of the e-cigarette brands are still selling three part devices based on an inferior technology, Green Smoke has used every possible technological advantage to produce the best e-cigarette experience for smokers. Their unique two-part design integrates both the nicotine solution and atomizer in one disposable cartridge. This idea makes the Green Smoke e-cigarette easier to use and improves the quality and smoker's overall experience dramatically.

The basic size, shape, color, and texture were all designed to closely resemble a traditional cigarette. When users inhale they get a strong and deep breath of smoke-like vapor that resembles smoke even when exhaling. The product even sports a realistic LED at the tip that glows bright when inhaling. Consumers can choose from different levels of nicotine that suits their personal smoking habits. They also have their choice of flavors that range from traditional tobacco to vanilla and apple.

All these advancements in the e cigarette have created a buzz among consumers looking for a quality alternative to smoking traditional tobacco cigarettes.

About Green Smoke:

Based in Florida, Green Smoke was founded to provide an authentic smoking experience that is less harmful than traditional tobacco. The company offers electronic e-cigarettes, including its patented two-piece design, starter kits and accessories. Visit www.GreenSmoke.com or call 1-888-224-1345 (Toll Free).

###


Copyright © 2010 by Green Smoke and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

• Web Image (72dpi): https://www.send2press.com/mediaboom/10-0222-GreenSmoke_72dpi.jpg

Story Title: Green Smoke's 2 Part E-Cigarette Designed to Meet Consumer Demand
• REFERENCE KEYWORDS/TERMS: electronic cigarettes, Miami, Florida, e-cigarette, Health, Diet and Fitness, Electronics, , MIAMI, Fla..

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (Green Smoke); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Fri, 25 Jun 2010 13:30:51 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Electronics

Roemtech, LLC Introduces HummBuster Technology in their New PMA-245H Amplifier for Classroom Audio Systems

Author: Roemtech, LLC
Dateline: Dallas, Texas (DALLAS, Texas)  | Wed, 16 Jun 2010

freeNewsArticles Story Summary: “DALLAS, Texas -- Roemtech, LLC announces its new PlenumAmp PMA-245H for release in July 2010. Designed and approved for above ceiling use, this plenum rated amplifier/mixer uses Roemtech's exclusive HummBuster technology to remove random noise that can enter classroom audio systems. The PMA-245H is intended for commercial and educational environments providing clear, crisp audio in a compact design.”



A R T I C L E:

Roemtech, LLC announces its new PlenumAmp PMA-245H for release in July 2010. Designed and approved for above ceiling use, this plenum rated amplifier/mixer uses Roemtech's exclusive HummBuster™ technology to remove random noise that can enter classroom audio systems. The PMA-245H is intended for commercial and educational environments providing clear, crisp audio in a compact design.

The PMA-245H is a dual input, 18 volt, 45 watt, plenum rated stereo amplifier/mixer. Because it is plenum rated, this amplifier is ideal for above ceiling applications. The 5.43"W x 1.65"H x 4.80"D chassis dimensions allow three amplifiers to fit in one rack space. In addition, a uniquely designed heat-sink provides effective heat-dissipation.

The new PMA-245H incorporates HummBuster technology. This technology suppresses noise that sometimes infiltrates classroom audio systems. Switches are incorporated to allow flexibility in resolving ground loop issues, should they arise.

Roemtech® CEO and President, D. Thomas Emlinger states, "We're excited about this new amplifier because it completely eliminates ground loop hums caused by inadequate electrical grounds and noisy sound cards."

The PlenumAmp PMA-245H is only available through authorized Roemtech audio-visual dealers. MSRP: $219.95, including three-year warranty and a 60 Watt power supply.

For additional information about the PMA-245H visit www.roemtech.com or contact James Belsher, James@Roemtech.com, at (972) 434-2582.

About Roemtech:

The Company is owned by D. Thomas Emlinger. He and his associates have spent nearly 8 years researching, developing and testing the PlenumAmp line. They currently have thousands of units successfully installed and future products under development.

###


Copyright © 2010 by Roemtech, LLC and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

• Web Image (72dpi): https://www.send2press.com/mediaboom/10-0616-roemtech_72dpi.jpg

Story Title: Roemtech, LLC Introduces HummBuster Technology in their New PMA-245H Amplifier for Classroom Audio Systems
• REFERENCE KEYWORDS/TERMS: PlenumAmp PMA-245H, Dallas, Texas, HummBuster technology, Electronics, Electronics, , DALLAS, Texas.

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (Roemtech, LLC); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Wed, 16 Jun 2010 20:25:04 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Electronics

Battizer’s Revolutionary Battery Charger Saves Money and the Environment

Author: Battizer LLP
Dateline: Singapore, Singapore (SINGAPORE)  | Tue, 27 Apr 2010

freeNewsArticles Story Summary: “SINGAPORE -- Reduce battery waste and save the environment? That's Battizer's goal. And now its most recent product launch, a full-charge capacity alkaline battery charger, is turning heads. It's the first in the world to claim maximum 100 percent full charge capacity and may even exceed the original capacity of a new battery.”



A R T I C L E:

Reduce battery waste and save the environment? That's Battizer's goal. And now its most recent product launch, a full-charge capacity alkaline battery charger, is turning heads. It's the first in the world to claim maximum 100 percent full charge capacity and may even exceed the original capacity of a new battery.

It is also the world's first and fastest, full-charge capacity alkaline battery charger to recondition rechargeable batteries. Why throw old batteries away when you can repair or recharge?

More than one billion batteries are disposed of every year in the U.S. alone and batteries are said to consume 50 times more energy in production as the end-product actually contains. So, it not only makes environmental sense, but also demonstrates economic savvy to use the Battizer charger.

This smart charger is technologically advanced and charges AA and AAA zinc carbon, alkaline, NiMh and NiCD batteries in one hour. It has a built-in microprocessor chip that monitors and controls the battery-charging process.

Zinc Carbon batteries only take 15 minutes to charge. With the Battizer charger, zinc carbon and alkaline batteries may be charged multiple times just like a rechargeable battery.

Also, as NiCD batteries are regularly charged and used, "memory" builds up. This memory consists of dendrite crystals and caused the battery to hold less and less of a full charge. Once the memory is full, the NiCD battery will no longer hold a charge. The Battizer charger can erase the memory and enable these batteries to hold a longer charge, just like new.

In addition to being efficient and technologically advanced, the Battizer charger is also easy to use. It has a simple, compact design for easy storage; plugs into household outlets; and has universal voltage.

So, what's the bottom line? People who use the Battizer charger as opposed to buying a new AA alkaline battery will save 10,598 times more. Click here (www.Battizer.com) for the cost-savings calculator.

Battizer is offering a limited time, introductory offer of $67 with no shipping fees. For more information, visit: www.Battizer.com .

About Battizer LLP:

Battizer is a young, dynamic manufacturer of money-saving energy products. Its goal is to help consumers save money, reduce battery waste and save the environment through its innovative green products.

-- Editorial Note: as with all battery rechargers, carefully follow all instructions and cautions and pre-inspect battery for signs of leakage and discard/recycle if leaking or damaged.

###


Copyright © 2010 by Battizer LLP and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

• Web Image (72dpi): https://www.send2press.com/mediaboom/10-0408-battizer_72dpi.jpg

Story Title: Battizer's Revolutionary Battery Charger Saves Money and the Environment
• REFERENCE KEYWORDS/TERMS: alkaline battery charger, Singapore, Singapore, recharge zinc carbon batteries, Electronics, Environment, , SINGAPORE.

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (Battizer LLP); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Tue, 27 Apr 2010 17:25:42 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Electronics

Talking Devices Anywhere for Pennies – RoweBots Releases DSPnano Operating System V3

Author: RoweBots Research Inc.
Dateline: Mon, 22 Feb 2010

freeNewsArticles Story Summary: “WATERLOO, Canada -- RoweBots Research Inc. announces and releases the DSPnano(TM) Operating System Version 3, achieving a significant milestone in shrinking intelligence into small and powerful microcontrollers and digital signal controllers. Motor control, ADPCM and color graphics along with other advanced networking applications and a Linux(TM) or POSIX compatible application are cost effective in any device.”



A R T I C L E:

WATERLOO, Canada /Neotrope News Network/ -- RoweBots Research Inc. announces and releases the DSPnano(TM) Operating System Version 3, achieving a significant milestone in shrinking intelligence into small and powerful microcontrollers and digital signal controllers. Motor control, ADPCM and color graphics along with other advanced networking applications and a Linux(TM) or POSIX compatible application are cost effective in any device.

The DSPnano Operating System offers an ultra tiny embedded POSIX environment for 8 and 16 bit microcontroller (MCU) based development that is also Linux compatible. DSPnano's open system environment enables users to migrate tens of thousands of programs from larger systems to the DSPnano real-time operating system (RTOS) to save time and reduce development costs. More importantly, this open approach reduces time to market.

DSPnano supports lean product development and extends the range of processors that can run POSIX from powerful MCUs with external memory to tiny system on chip (SOC) MCUs. For the first time, users can develop all embedded products on common POSIX application programming interfaces (APIs). This common POSIX API reduces training time, eliminates rework, and facilitates reuse of software components directly reducing development time, costs and risk.

DSPnano V3 offers the following enhancements:
* Advanced networking
* DSP Enhancements with ADPCM
* FAT12/16/32 File Systems
* Flash File System support with uSD, SD and MMC
* Other I/O including Graphics, USB and Motor Control
* RTOS Viewer Tools
* Support for thousands of MCUs.

As MPUs shrink, all of these functions along with an application can run in a single inexpensive MCU. You can put intelligent devices anywhere - in your home appliances and networks, in your clothes and jewelry, in your clean tech lighting, HVAC and power generation systems, in your car or inside your factory. Where we place intelligent devices is only limited by your imagination.

DSPnano is helping build a simpler, friendlier and more energy efficient world.

DSPnano royalty free licenses are FREE for version 2 and start at $999 for version 3. Both are immediately available.

About RoweBots Research Inc.:

RoweBots is developing the next generation of embedded POSIX software for OEM applications. The company is based in Waterloo, Canada.

For more information, visit www.rowebots.com .

To view a VNR (video news release) for this story, visit:
www.Send2Press.com/newswire/2010-02-0222-001.shtml .

Trademarks: DSPnano is a registered trademark of RoweBots Research Inc. All other product names are the trademarks of their respective owners.

###


Copyright © 2010 by RoweBots Research Inc. and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

• Web Image (72dpi): https://www.send2press.com/mediaboom/02-0222-RB-DSPnano_72dpi.jpg

Story Title: Talking Devices Anywhere for Pennies - RoweBots Releases DSPnano Operating System V3
• REFERENCE KEYWORDS/TERMS: RoweBots Research DSPnano, , , system on chip, Electronics, Computing, , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (RoweBots Research Inc.); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Mon, 22 Feb 2010 06:00:25 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Electronics

CyberTouch AV New Touch Screen Monitors Now Compatible with Extron Annotator

Author: CyberTouch
Dateline: Fri, 13 Nov 2009

freeNewsArticles Story Summary: “NEWBURY PARK, Calif. (SEND2PRESS NEWSWIRE) -- CyberTouch is pleased to announce its release of a complete line of touch screen monitors compatible with the Extron Annotator. Ranging in sizes from 6.4 to 52 inches, CyberTouch|AV's line of touch screen monitors are offered in desktop/wall-mount (Orion), panel-mount / flush-mount (Eclipse) and open-frame (Sola) styles. All of CyberTouch|AV touch screen monitors connect with the annotator via USB or serial connection.”



A R T I C L E:

NEWBURY PARK, Calif., Nov. 13 (SEND2PRESS NEWSWIRE) -- CyberTouch is pleased to announce its release of a complete line of touch screen monitors compatible with the Extron Annotator. Ranging in sizes from 6.4 to 52 inches, CyberTouch|AV's line of touch screen monitors are offered in desktop/wall-mount (Orion), panel-mount / flush-mount (Eclipse) and open-frame (Sola) styles.

All of CyberTouch|AV touch screen monitors connect with the annotator via USB or serial connection. CyberTouch|AV offers the largest line of Extron Annotator compatible product line in the industry.

About CyberTouch|AV: Founded in 1982, CyberTouch|AV designs, manufactures, and markets specialty touch screen monitors and related touch products for the audio visual industry. CyberTouch|AV touch screen monitors are compatible with the leading AV companies such as AMX, Crestron, Pioneer, and Boeckeler Pointmaker.

For more information please call 805-499-5000 ext. 4140 or visit: www.CyberTouchAV.com.

About the Extron Electronics Annotator: The Extron Annotator is a high performance, hardware-based annotation processor that offers live annotation capabilities plus high performance scaling and switching on any type of display. With an intuitive graphical user interface, a presenter can easily draw, point, or add text to motion video or still images using the CyberTouch|AV touch screen monitors.

The Annotator's seven-input switcher supports analog and digital video formats including RGB, DVI, and HD-SDI, simplifying system design and significantly reducing overall system cost.

The Annotator is ideal for applications that require the overlay of graphics and text within A/V presentations, including law enforcement, medicine, education, telepresence, and live events.

For more information regarding the Extron Annotator, please visit www.extron.com/company/article.aspx?id=annotatorad.

###


Copyright © 2009 by CyberTouch and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

• Web Image (72dpi): https://www.send2press.com/mediaboom/09-1113-CTextron_72dpi.jpg

Story Title: CyberTouch AV New Touch Screen Monitors Now Compatible with Extron Annotator
• REFERENCE KEYWORDS/TERMS: CyberTouch touch screens, , , Extron Annotator, Electronics, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (CyberTouch); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Fri, 13 Nov 2009 17:02:02 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Electronics

Roemtech Introduces New PMA-245 PlenumAmp with More Power and Greater Clarity for Classroom and Commercial Installation

Author: Roemtech, LLC
Dateline: Fri, 30 Oct 2009

freeNewsArticles Story Summary: “DALLAS, Texas (SEND2PRESS NEWSWIRE) -- Roemtech, LLC has announced the availability of their new Plenum Classroom Amplifier, model PlenumAmp PMA-245. It is designed and approved for above ceiling installations allowing end users to have a more powerful amplifier system that is easily concealed. Commercial and educational environments with data projectors need an amplifier that provides clear, powerful sound without taking up excess room. This product fills that need without sacrificing power or clarity.”



A R T I C L E:

DALLAS, Texas, Oct. 29 (SEND2PRESS NEWSWIRE) -- Roemtech™, LLC has announced the availability of their new Plenum Classroom Amplifier, model PlenumAmp PMA-245. It is designed and approved for above ceiling installations allowing end users to have a more powerful amplifier system that is easily concealed. Commercial and educational environments with data projectors need an amplifier that provides clear, powerful sound without taking up excess room. This product fills that need without sacrificing power or clarity.

The PlenumAmp PMA-245 is a compact, 18 volt, 45 watt, plenum rated amplifier/mixer. Accepting both RCA and 3.5mm stereo inputs, it provides excellent flexibility and is equipped with independent mixer volume controls for each source. Built-in noise filtration circuitry ensures clear, crisp audio performance.

Due to the plenum rating, it is ideal for classroom and business applications where space is an issue. In addition, the 5.43-inch width x 1.65-inch height x 4.80-inch deep chassis is uniquely designed with a heat-sink to provide effective heat-dissipation. In situations that require racks, its dimensions allow for three amplifiers to fit in one standard rack space.

CEO and President, D. Thomas Emlinger states, "The PMA-245 distributes high-quality audio at a great price without compromising performance. It is very linear and has exceptional bass response which is unique in our industry for compact amplifiers."

The PlenumAmp PMA-245 is only available through authorized Roemtech™ audio-visual dealers. MSRP: $199.95, including three-year warranty and 60 Watt power supply.

About Roemtech:
The Company is owned by D. Thomas Emlinger. He and his associates have spent seven years researching, developing and testing the PlenumAmp line. They currently have thousands of plenum classroom amplifier units successfully installed and future products under development.

For additional information on the PMA-245 visit www.roemtech.com or contact James Belsher, James@Roemtech.com, at (972) 434-2582.

###


Copyright © 2009 by Roemtech, LLC and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

• Web Image (72dpi): https://www.send2press.com/mediaboom/09-1029-PMA245_72dpi.jpg

Story Title: Roemtech Introduces New PMA-245 PlenumAmp with More Power and Greater Clarity for Classroom and Commercial Installation
• REFERENCE KEYWORDS/TERMS: plenum classroom amplifier, , , roemtech plenumamp pma245, Electronics, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (Roemtech, LLC); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Fri, 30 Oct 2009 14:56:03 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Electronics

Sticky Adhesives Removed from Thermal Print Heads Using The New Dual Action Cleaning Pen now Available from KICTeam

Author: KICTeam, Inc.
Dateline: Mon, 12 Oct 2009

freeNewsArticles Story Summary: “AUBURN, Maine (SEND2PRESS NEWSWIRE) -- The new Dual Action Cleaning Pen, designed to remove stubborn adhesive build up from thermal print heads, is being released today by KICTeam. Using the same convenient marker-style design currently found with the EZ Thermal Printer Cleaning Pen, this new pen has two separate marker nibs to perform two very distinct functions. The first nib carries an adhesive remover to make it possible to easily remove adhesives caused during printing of label stock and linerless labels.”



A R T I C L E:

Removes adhesive build up and cleans thermal print heads for all industries.

AUBURN, Maine, Oct. 12 (SEND2PRESS NEWSWIRE) -- The new Dual Action Cleaning Pen, designed to remove stubborn adhesive build up from thermal print heads, is being released today by KICTeam. Using the same convenient marker-style design currently found with the EZ Thermal Printer Cleaning Pen, this new pen has two separate marker nibs to perform two very distinct functions. The first nib carries an adhesive remover to make it possible to easily remove adhesives caused during printing of label stock and linerless labels.

The second nib carries the same isopropyl alcohol recommended by all thermal printer manufacturers to properly clean the print head. The combination of both products in one easy-to-use pen creates a very versatile product for maintaining thermal printers.

"The adhesive build up created when printing label and linerless label stock with a thermal printer is unavoidable," said Debra Ross, Product Manager of KICTeam. "Like any fine piece of machinery a little maintenance will go a long way to prolong the life of the equipment. By simply removing the adhesives that build up with the adhesive remover end of the pen, then cleaning the print head with the IPA end, you have easily accomplished what the thermal printer manufacturers recommend. The Dual Action Cleaning Pen keeps the print head and platen roller clean of contaminates and sticky adhesives."

Label printing is an everyday activity in almost all industries. The accuracy of the information on the label is directly related to the cleanliness of the print head. Barcodes could easily be misrepresented with a stray line caused by adhesive or paper dust build up on the print head. The readable characters on labeled medicine or sample vials could become illegible. Most errors can be easily corrected with a simple cleaning. The Dual Action Cleaning Pen is the proper tool to clean thermal print heads.

About KICTeam:
KICTeam is the world leader in the development and manufacturing of cleaning cards, including Waffletechnology™-based (patent pending) products. Our growth in the last 20 years is driven by the close cooperation with OEM's in the development of proprietary cleaning solutions. Our headquarters are in Auburn, Maine, with a worldwide presence through strategic partners.

For more information, please visit www.kicteam.com or www.cleaningcards.com.

###


Copyright © 2009 by KICTeam, Inc. and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

• Web Image (72dpi): https://www.send2press.com/mediaboom/09-1012-CleaningPen_72dpi.jpg

Story Title: Sticky Adhesives Removed from Thermal Print Heads Using The New Dual Action Cleaning Pen now Available from KICTeam
• REFERENCE KEYWORDS/TERMS: thermal printer cleaning, , , print equipment maintenance, Electronics, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (KICTeam, Inc.); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Mon, 12 Oct 2009 16:07:02 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.