Energy, Oil and Gas

Innovative, Economical, Environmental Friendly System that Dramatically Increases Cash Flow from Wells by Pumping Oil, Water, and Gas More Efficiently than Current Systems

Author: DynaPump, Inc.
Dateline: Wed, 15 Jun 2005

freeNewsArticles Story Summary: “LOS ANGELES, Calif. - June 15 (SEND2PRESS NEWSWIRE) -- DynaPump, Inc. has announced the newest addition to its line of innovative pumping systems; the Natural Gas DynaPump Power Unit. It allows all producers of fluid from the ground to pump fluid more efficiently than with current systems. Thousands of oil and gas wells can be operated more efficiently and cost effectively by using the natural gas power unit instead of an electric unit freeing up electricity for other needs. The DynaPump natural gas power unit provides the best solution for producing the maximum flow at the lowest lifting cost.”



A R T I C L E:

All companies that produce fluids and gases from the ground can benefit greatly in many areas

LOS ANGELES, Calif. - June 15 (SEND2PRESS NEWSWIRE) -- DynaPump, Inc. (www.dynapumpinc.com) has announced the newest addition to its line of innovative pumping systems; the Natural Gas DynaPump Power Unit. It allows all producers of fluid from the ground to pump fluid more efficiently than with current systems. Thousands of oil and gas wells can be operated more efficiently and cost effectively by using the natural gas power unit instead of an electric unit freeing up electricity for other needs. The DynaPump natural gas power unit provides the best solution for producing the maximum flow at the lowest lifting cost. Replacing current lifting systems with this DynaPump solution could free up millions of Kilowatts of energy on the grid.



Photo Caption: The Natural Gas Power Unit does not require a power line and operates on casing gas or propane. High energy efficiency is created by combining the efficiency of the pumping unit with a better use of a natural gas engine.

The gas consumption of the DynaPump natural gas power unit is about 20% (5 to 1) of the consumption of a conventional beam pump with an engine and the DynaPump maintains all the sophistication of built-in controls, communications and feedback that the electrical unit has. This solution could turn the market from electrical units back to using gas engines on the wellhead, as the DynaPump solution is more economical in initial capital, and more economical in operating expenses, while freeing up a tremendous amount of power on the grid to be used in other ways.

The Power Unit is the control center that provides the ability to convert electrical energy to hydraulic power and to control pump stroke as needed to provide optimum pumping efficiency.

The Pumping System allows for independent control of the speed in both the up and down direction and allows for independent adjustment of the top and bottom stroke. The unit also has the ability to adjust its speed automatically to provide pump off control.

Oil operators such as ChevronTexaco, BP and Williams are currently using the natural gas power unit in over 50 wells to more efficiently pump oil, water, and gas resulting in increased cash flow with many environmental benefits.

Dan Johnson, government and public affairs manager for ChevronTexaco was quoted in The Four Corners Business Journal, August 2003, as saying "DynaPumps are sleek, low profile and quiet. From our point of view, we think they're going to be more efficient. They'll use less fuel; they use about 60% less fuel to pump, so they're environmentally excellent. And they have a longer stroke, so they produce more water, and they have fewer strokes so they require less maintenance, yet they're the same price (as traditional pumps), so how can you beat that?"

On August 11, 2004 ChevronTexaco was recognized by the Colorado Oil and Gas Conservation Commission for its installations of the DynaPump units in Durango, CO and was presented with the "Application of New Technology Award."


About DynaPump, Inc.
The company is a rapidly growing Southern California-based designer and manufacturer of surface-mounted artificial lift systems. Incorporated in 1993, the Company manufactures and sells a revolutionary surface-mounted hydraulic pumping system that has dramatically impacted the petroleum industry. Designed and developed over the last 26 years, this proprietary lifting system consists of electronic sensors, hydraulic equipment, and computer control and monitoring.

While initially targeting the petroleum industry, the Company believes that its innovative technology has a diverse array of applications. It is DynaPump's goal to become the world leader in surface-mounted, artificial lifting systems, and to realize its potential as a billion dollar company. Hundreds of DynaPumps in all models are currently in operation in seven states with over 20 oil operators including ExxonMobil, Chevron, BP, ConocoPhillips, Marathon, Occidental Petroleum, Vintage, Williams, Apache and Berry.

For more information on the company's products please visit www.dynapumpinc.com or call (818) 407-7577.


###


Copyright © 2005 by DynaPump, Inc. and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

Story Title: Innovative, Economical, Environmental Friendly System that Dramatically Increases Cash Flow from Wells by Pumping Oil, Water, and Gas More Efficiently than Current Systems
• REFERENCE KEYWORDS/TERMS: , , , , Energy, Oil and Gas, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (DynaPump, Inc.); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Wed, 15 Jun 2005 20:06:00 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Energy, Oil and Gas

‘Business & Beyond’ to Feature The Lyamec Corporation – Commercial Activities with Libya

Author: The Lyamec Corporation
Dateline: Fri, 10 Jun 2005

freeNewsArticles Story Summary: “HOUSTON, TX - June 10 (SEND2PRESS NEWSWIRE) -- The Lyamec Corporation (www.lyamec.com) announces that Platinum Television Group has selected The Lyamec Corporation for its innovative, educational television series 'Business and Beyond.' This segment is tentatively scheduled to air in late 2005 nationally on CNBC as well as internationally on CNBC Europe and regional news networks in many of the top 100 markets nationwide.”



A R T I C L E:

HOUSTON, TX - June 10 (SEND2PRESS NEWSWIRE) -- The Lyamec Corporation (www.lyamec.com) announces that Platinum Television Group has selected The Lyamec Corporation for its innovative, educational television series "Business and Beyond." This segment is tentatively scheduled to air in late 2005 nationally on CNBC as well as internationally on CNBC Europe and regional news networks in many of the top 100 markets nationwide.

In their press of June 4th, 2005, Platinum Television outlined, "Several promising U.S. companies were presented to the Platinum Television Group's panel of executive producers and advisory board members. After the presentation, The Lyamec Corporation was selected by Platinum Television to be featured for the 'Models of Excellence' Series. Platinum Television Group's advisory board is made up of MIT and Harvard business school graduates, as well as magazine editors of Fortune, Forbes and INC."

The content of the show will include an interview with company representatives and a discussion to educate viewers about the booming economy in Libya. The feature will cover the history of its company up to present. Additionally, by partnering up with 30-year veteran Wilfred James Barnhill and Global Oil Tools; The Lyamec Corporation is bringing the most sought-after and most advanced U.S. oilfield-related technologies to Libya. Global Oil Tools has been amidst a tug of war between venture capital groups, by Grifco International's (OTC: GFCI.pk) leading position. In a statement by Lyamec, "We are humbled by the gesture from Platinum Television, and we welcome the opportunity. The public will understand and meet some of our clients and partners; focusing on American ingenuity and pioneering decision makers."

The show will also look at their retail sector expansion models and market share growth plans for products and services, such as Apple Computers and Western Union; as well as promoting access to hotel chain investment opportunities by fostering support for the likes of Carlson Hotels Worldwide Radisson, and more fashionably brands of the Westmont hospitality line; with a final look at their vision on Libya's would be airline model industry.

The firm boasts an impressive pool of professionals, specialized commercial advisors and marketing developers. This particular group has a unique network of professionals providing expertise and in-depth coverage on virtually every topic, from high technology to interpersonal and marketing communications. The firm's popular destination focus currently is Libya with ongoing expansions into Africa. Their Lyamec & Associates subsidiary services its clients with business laws and regulations, communication, concept development, contract negotiations, distribution, marketing, sourcing, strategy, and total project management. Although Lyamec provides these business-enhancing services, its main focus is to help companies and organizations make the best decisions while creating a clear platform for engagement, understanding and providing positive results for developing countries and emerging markets.

Lyamec currently represents various U.S. and international ventures in Libya. Financial, medical, and commercial developers are among the current clients. Although Lyamec deals primarily with Libyan commercial activities, there are several interesting contact bases throughout the U.S., Canada, the U.K., and France. Lyamec is dedicated to applying knowledge and expertise in identifying, developing and implementing business practices with technology to improve a competitive position for clients, partners and affiliates.

For more information, see www.lyamec.com.

All trademarks acknowledged.

###


Copyright © 2005 by The Lyamec Corporation and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

Story Title: 'Business & Beyond' to Feature The Lyamec Corporation - Commercial Activities with Libya
• REFERENCE KEYWORDS/TERMS: , , , , Energy, Oil and Gas, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (The Lyamec Corporation); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Fri, 10 Jun 2005 15:18:00 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Energy, Oil and Gas

Global Oil Tools Moves on Libya without Grifco International

Author: The Lyamec Corporation
Dateline: Fri, 03 Jun 2005

freeNewsArticles Story Summary: “HOUSTON, TX - June 3 (SEND2PRESS NEWSWIRE) -- With regards to the already expired agreement between Grifco International and Global Oil Tools, Inc. and further with Grifco's CEO, Jim Dial's oddly timed retraction of compliance with the preset terms of engagement already agreed to with The Lyamec Corporation; Lyamec has now solidified its position with Global Oil Tool's expansion into Libya.”



A R T I C L E:

HOUSTON, TX - June 3 (SEND2PRESS NEWSWIRE) -- With regards to the already expired agreement between Grifco International (OTC Pink Sheets: GFCI), and Global Oil Tools, Inc and further with Grifco's CEO, Jim Dial's oddly timed retraction of compliance with the preset terms of engagement already agreed to with The Lyamec Corporation; Lyamec has now solidified its position with Global Oil Tool's expansion into Libya. The partnership between the Lyamec Corporation and Global Oil Tools on the manufacturing and distribution rights for Africa, the Middle East and Azerbaijan including the 24,000 sq ft. facility staged in Libya, has been fully cleared to move on without any further delay from Grifco.

The agreement brings a solid opportunity to access a pool of $400 Million USD annually in oil tool supply orders that the region represents in this partnership. The agreement between Global and Lyamec has now made it next to impossible for Grifco to come back for Global, now or in the future without a heavy premium that would ultimately cost the company and or its investors substantially.

In reply to Jim Dial's statement on the furtherance of an acquisition of Global Oil Tools to The Lyamec Corporation, that Grifco will still continue to gather momentum in bringing a buyout of Global until it is successful; a Lyamec spokesman addressed this point in a private conference with its participants by saying, "I am truly amazed that Jim Dial has lost such an opportunity, and what is more plausible, is that he added the weight of millions if not in the tens of millions on the cost to his company to achieve such a goal. It was not a logical decision to anyone here, and would probably and ultimately lead to quite a few upset investors". He went on to add," We are also looking further into legal ramifications by Jim Dial's performance on this issue, going as far back as mid April, 2005 that we are now looking into."

The Lyamec Corporation, a merchandising, distribution and franchise firm that has gained strong ground in offering its clients an efficient access point to reach out to multi-billion dollar industries that offer unparallel commercial opportunities.

Global Oil Tools one of the most successfully managed and operated firms, in its industry, by 30 year veteran Wilfred James Barnhill, and is equipped with state-of-the-art machinery and technology know how, that produces a complete line of more than 6,000 tools for its clients. The management of Global Oil tools is known and respected throughout the industry with over 150 customers both domestically and internationally.

Contact: R G Raymond of The Lyamec Corporation, +1-281-599-8990.

###


Copyright © 2005 by The Lyamec Corporation and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

Story Title: Global Oil Tools Moves on Libya without Grifco International
• REFERENCE KEYWORDS/TERMS: , , , , Energy, Oil and Gas, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (The Lyamec Corporation); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Fri, 03 Jun 2005 10:16:00 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Energy, Oil and Gas

Champion Technologies, Inc. Opens Cutting-Edge Research and Development Facility

Author: Champion Technologies, Inc.
Dateline: Thu, 07 Apr 2005

freeNewsArticles Story Summary: “FRESNO, TX -- (SEND2PRESS NEWSWIRE) -- On March 31st, 2005, dignitaries and scientists from around the world were on hand to help celebrate the grand opening of a new addition of the state-of-the-art research and development center at Champion Technologies, Inc. The 35,000 square foot facility is located at Champion's global research headquarters in Fresno, Texas.”



A R T I C L E:

FRESNO, TX -- (SEND2PRESS NEWSWIRE) -- On March 31st, 2005, dignitaries and scientists from around the world were on hand to help celebrate the grand opening of a new addition of the state-of-the-art research and development center at Champion Technologies, Inc. The 35,000 square foot facility is located at Champion's global research headquarters in Fresno, Texas.



Photo Caption: On hand for the unveiling of the new facility were Tom Stavinoha, Fort Bend County Commissioner; James Patterson, Fort Bend County Commissioner; Earl McCauley, Champion Technologies Senior Project Engineer; Virgil Seale, Champion Technologies Director of R&D; Tom Amonett, Champion Technologies President & CEO; Grady Prestage, Fort Bend County Commissioner; Ben W. (Bud) Childers, Fort Bend County Attorney; Herb Appel, President - Fort Bend Economic Development Council.


Positioned strategically near the hub of the worldwide petroleum industry in Houston, the new facility is home to some 60 highly-trained research professionals, with 70, fully-equipped, individual work stations and access to the industry's most advanced and sophisticated analytical equipment.

The new laboratories represent another major step in Champion's continuing investment in facilities and capabilities, following the milestone achievement of the new technology center in Calgary, Alberta, Canada last year.

Champion designs and manufactures a complete line of unique and highly-effective proprietary specialty chemicals for the oil-and-gas industry. The sparkling new laboratories are designed to aid Champion's teams of top-rated researchers in developing superior solutions for specific challenges facing customers in the field, reflecting Champion's dedication to a customer-driven approach.

"These outstanding new laboratories significantly enhance our ability to create innovative products and tailor our services to the unique needs of our customers," said Tom Amonett, Champion Technologies President and CEO. "Here, our researchers have access to a range of technological tools unsurpassed in the industry, everything they need to produce timely and effective answers for the challenging questions our customers pose."

"This new facility epitomizes our company's culture of excellence," said Scott Knutson, Champion Technologies Vice President of Technology and Global Marketing. "We are proud that this new facility will help us respond more effectively to help our customers in their quest for energy worldwide."


About Champion Technologies, Inc.

Since its beginnings in the early 1950s as Champion Chemicals, serving the rapidly growing oil industry in west Texas, Champion Technologies, Inc., has grown into a truly global organization and continues to experience steady growth by providing innovative products and exceptional service for customers worldwide. Today, most of the Company's intermediates are manufactured in its Fresno, Texas complex. Most of its diluted or formulated products are made in Odessa, Texas; Calgary, Alberta, Canada; or at one of its international locations. The Fresno R&D and QC laboratories assure innovative solutions, effective products and accurate test results to diagnose customer problems.

Champion Technologies, 3355 West Alabama, Suite 400, Houston, Texas, USA 77098

WEBSITE: www.champ-tech.com

###


Copyright © 2005 by Champion Technologies, Inc. and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

Story Title: Champion Technologies, Inc. Opens Cutting-Edge Research and Development Facility
• REFERENCE KEYWORDS/TERMS: , , , , Energy, Oil and Gas, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (Champion Technologies, Inc.); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Thu, 07 Apr 2005 23:01:00 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.