Networks and Encryption

CorEdge Networks Demonstrates Low-Latency Ethernet Switches at Hot Interconnects Symposium

Author: CorEdge Networks, Inc.
Dateline: Wed, 17 Aug 2005

freeNewsArticles Story Summary: “SAN RAMON, Calif. - August 17 (SEND2PRESS NEWSWIRE) -- CorEdge Networks, Inc., a leader and innovator in ATCA (Advanced Telecom Computing Architecture) and MicroTCA switching equipment, will showcase two low-latency non-blocking Ethernet switches with demonstrated performance of under 3.5 microsecond delay at the 13th annual IEEE Symposium on high performance interconnects. The Hot Interconnects show will take place on August 17~19, 2005 at the William R. Hewlett Teaching Center at Stanford University in California.”



A R T I C L E:

SAN RAMON, Calif. - August 17 (SEND2PRESS NEWSWIRE) -- CorEdge Networks, Inc., a leader and innovator in ATCA (Advanced Telecom Computing Architecture) and MicroTCA switching equipment, will showcase two low-latency non-blocking Ethernet switches with demonstrated performance of under 3.5 microsecond delay at the 13th annual IEEE Symposium on high performance interconnects. The Hot Interconnects show will take place on August 17~19, 2005 at the William R. Hewlett Teaching Center at Stanford University in California.



The first product demonstration will be a 2U ATCA-based port switch using a CorEdge Networks cutaway carrier card and two Advanced Mezzanine Cards, each with four 1Gigabit Ethernet inputs/outputs. In this demonstration, the CorEdge Networks device will be switching between two Dell servers, each equipped with a Level 5 Networks' EtherFabric Network Interface Card (NIC). Using Network Protocol Independent Performance Evaluator (NetPIPE) benchmarks a total application-to-application delay of under 15 ┬Ásec will be demonstrated; the delay attributable to the CEN switch alone was under 3.5 ┬Ásec. The detailed results can be downloaded at www.coredgenetworks.com/test.

"Until now, High Performance Computing users with low latency requirements were forced to use high cost, incompatible solutions such as Infiniband, Quadrics and Myrinet. While many people have wanted to use Ethernet, this has not been possible, due to high latency associated with Ethernet equipment. Now, with innovative products from companies like CorEdge and Level 5 Networks, users can enjoy the low cost of Ethernet with the low latency of Infiniband," Said Will Chu, president of CorEdge Networks.

"We were confident that the combination of our high performance EtherFabric NIC coupled with a low latency CorEdge switch would serve as a proof-point that that Ethernet is a viable option for low-latency HPC environments." Level 5Networks, the inventor of EtherFabric low-latency Ethernet NICs, complements low-latency switches for a full end-to-end solution. "EtherFabric complements the high performance Ethernet solution by providing an efficient server network interface," said Craig Easley, Director of Product Marketing at Level 5 Networks.

In addition to low latency, CorEdge Network's highly programmable multi-protocol architecture will allow HPC users to customize their switches in a manner not possible with Infiniband or Myrinet. Also, by using ATCA-compliant hardware that has been designed to telco standards, HPC users can benefit from five-nines availability (99.999%).

CorEdge Networks also will be showing a MicroTCA-based switch with similar performance characteristics using a CorEdge Virtual Carrier Manager Card and two 10 Gigabit Ethernet Advanced Mezzanine Cards. MicroTCA is a lower cost form of ATCA in which Advanced Mezzanine Cards are attached directly to a backplane without the need for carrier cards.

At Hot Interonnects, CorEdge Networks' Executive Chairman, Bart Stuck, will be discussing the prospects for high performance Ethernet switching as a panelist on the "Ethernet vs. Ethernot" panel along with other distinguished industry and technical luminaries.


About CorEdge Networks

CorEdge Networks is a leading supplier of IP/chips, sub-system and system-level products. Through its dynamically programmable Multi-Protocol Communications Engine, Multi-Protocol Switch Fabric, and advanced digital and mixed-signal technologies, the company develops and markets networking products that enable high performance, scalable, flexible, reliable and cost-effective solutions for ATCA, MicroTCA, HPC and Data Center applications. www.coredgenetworks.com.



###


Copyright © 2005 by CorEdge Networks, Inc. and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

Story Title: CorEdge Networks Demonstrates Low-Latency Ethernet Switches at Hot Interconnects Symposium
• REFERENCE KEYWORDS/TERMS: , , , , Networks and Encryption, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (CorEdge Networks, Inc.); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Wed, 17 Aug 2005 10:53:00 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Networks and Encryption

Engate Technology Corporation Announces Innovative Diskless, Embeddable Spam Interdiction Technology

Author: Engate Technology Corp.
Dateline: Mon, 01 Aug 2005

freeNewsArticles Story Summary: “RENO, NV - August 1 (SEND2PRESS NEWSWIRE) - Engate Technology Corporation, an emerging IT security company, announced today an innovative approach to spam prevention with the introduction of its diskless, small footprint, embeddable spam interdiction technology. The new patent pending technology, available on the EMS 1500, empowers hardware OEMs with unprecedented capability to analyze and reject email at the protocol layer, thereby interdicting unwanted and malicious mail before it leaves the sender's server.”



A R T I C L E:

Engate Source Interdiction(TM) technology enables router and gateway products to offer anti-spam protection with 97+% accuracy

RENO, NV - August 1 (SEND2PRESS NEWSWIRE) - Engate Technology Corporation (www.engate.com), an emerging IT security company, announced today an innovative approach to spam prevention with the introduction of its diskless, small footprint, embeddable spam interdiction technology. The new patent pending technology, available on the EMS 1500, empowers hardware OEMs with unprecedented capability to analyze and reject email at the protocol layer, thereby interdicting unwanted and malicious mail before it leaves the sender's server.

ENGATE

Concentrating on the spammer rather than the spam is a radical departure in this industry. Engate establishes the reputation of spammers and their networks, so wherever the spammer goes, his reputation follows him. The new technology, which has been available on the Engate MailSentinel(TM) EMS 2500 network appliance for service providers and enterprise for over a year, is now adapted to an embedded environment commonly found on firewalls, routers, cable modems and wireless access points. The technology is capable of very high throughput.

"Web Crossing's customers require reliable, scalable services. Engate's products provide this today, and their technology makes it impossible for a spammer to crack," said Tim Lundeen, President & CEO, Web Crossing. "We've integrated Engate's anti-spam screening with our products for a more productive customer experience and spam-free mailboxes, while simultaneously reducing our network load."

"There is a significant need for a small footprint, highly accurate, embeddable spam interdiction technology to block spam while it is in the public space," said Wil Cochran, CEO of Engate Technology Corporation.

"Four years ago we realized the only way to stop spam was to prevent it from ever entering the network," added Rich White, Engate's CTO. "We set out to build a 'first-of-its kind' solution that solves the spam problem at the source."

Unprecedented Technology Improves Email Security

The Engate MailSentinel uses patent pending Engate Source Interdiction technology to prevent unwanted or malicious e-mail from leaving the source, thereby never entering the network. Unlike other spam detection technologies that analyze the content of a message to determine its legitimacy, the Engate solution analyzes the actual SMTP session to detect the "tricks" used by spammers to hide their identity. The result is improved network protection, performance and resource utilization. This approach identifies and eliminates over 97% of attempted spam transmissions with a .0002% false positive rate.

With the Engate solution, e-mail is never stored at the gateway. The Engate approach creates an environment that is highly efficient and reliable with no need for a hard disk, and the entire program runs in less than 17 MB of RAM making it embeddable in many firewalls and other gateway devices.

Available Today

For organizations that are interested in deploying Engate spam interdiction technology today, Engate offers the Engate MailSentinel EMS 2500 appliance. The Engate MailSentinel EMS 2500 appliance is a highly cost effective gateway that is easily installed with virtually no on-going maintenance. A typical IT department can deploy the MailSentinel in less than an hour. Pricing for the Engate MailSentinel EMS 2500 appliance starts at $1695, including a 12 month subscription contract and customer support.

Engate is approaching potential OEMs interested in licensing the EMS 1500 product technology which is adaptable to a variety of platforms. Evaluation units will be available in August 2005.

About Engate Technology Corporation

Engate Technology Corporation was founded in 2003 to provide a new generation of spam/malicious mail protection and IP security technologies. Engate has filed seven patents relating to the technology. The Engate founders are a team of successful entrepreneurs with backgrounds in networking, Internet security and Bell Labs.

For more information, visit the company's website at www.engate.com or contact Wil Cochran of Engate Technology Corp. at pr @ engate.com.


"Engate MailSentinel(TM)" and "Engate Source Interdiction(TM)" are trademarks of Engate Technology Corporation.



###


Copyright © 2005 by Engate Technology Corp. and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

Story Title: Engate Technology Corporation Announces Innovative Diskless, Embeddable Spam Interdiction Technology
• REFERENCE KEYWORDS/TERMS: , , , , Networks and Encryption, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (Engate Technology Corp.); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Mon, 01 Aug 2005 07:00:00 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Networks and Encryption

CorEdge Networks Demonstrates Major Advances in AMC, ATCE and MicroTCA Products and Systems at SUPERCOMM 2005

Author: CorEdge Networks
Dateline: Mon, 06 Jun 2005

freeNewsArticles Story Summary: “SAN RAMON, Calif. - SUPERCOMM 2005 - June 6 (SEND2PRESS NEWSWIRE) -- CorEdge Networks, Inc., will continue its dramatic product and technology innovation by demonstrating numerous industry-first working AdvancedTCA (ATCA) and MicroTCA products at SUPERCOMM 2005, held June 7-9, 2005, in Chicago's McCormick Place. CorEdge products will be showcased in the PCI Industrial Computer Manufacturers Group (PICMG) pavilion (booth #43085). Additionally, a number of firms participating in the show will demonstrate CorEdge products in conjunction with their own ATCA and MicroTCA products.”



A R T I C L E:

SAN RAMON, Calif. - SUPERCOMM 2005 - June 6 (SEND2PRESS NEWSWIRE) -- CorEdge Networks, Inc., will continue its dramatic product and technology innovation by demonstrating numerous industry-first working AdvancedTCA (ATCA) and MicroTCA products at SUPERCOMM 2005, held June 7-9, 2005, in Chicago's McCormick Place. CorEdge products will be showcased in the PCI Industrial Computer Manufacturers Group (PICMG) pavilion (booth #43085). Additionally, a number of firms participating in the show will demonstrate CorEdge products in conjunction with their own ATCA and MicroTCA products. CorEdge also participated in PICMG's ATCA Interoperability Workshop (AIW) #11 the week prior to the show.


"CorEdge Networks is pleased to support PICMG and the MicroTCA committee by helping to move MicroTCA from concept to working prototype," said William Chu, CorEdge Networks President. "Our product demonstrations at SUPERCOMM 2005, developed in close collaboration with the MicroTCA committee and numerous third party sub-system component vendors, showcase the breadth of options and capabilities available to service providers in meeting their next generation network needs and applications."

CorEdge will demonstrate the following products at SUPERCOMM 2005: the world's first MicroTCA virtual carrier manager (VCM), 1Gbps and 10Gbps (gigabit-per-second) reprogrammable AdvancedMC (AMC) modules, and an ATCA reprogrammable cutaway carrier card. The CorEdge VCM and AMC modules will be integrated into various MicroTCA prototype systems, including the "cube," 75mm and 150mm versions. The CorEdge AMCs and ATCA carrier card will be demonstrated in a 2U ATCA-based Gigabit Ethernet (GigE) switch.

CorEdge Networks MicroTCA Virtual Carrier Manager (VCM) - A critical component of the MicroTCA concept is the CorEdge MicroTCA VCM-another industry first, built specifically for SUPERCOMM 2005 at the request of the MicroTCA committee. The CorEdge VCM is a single-width, extended full-height AMC, based on existing CorEdge AMC technology and uses new B+ connector technology. It acts as a Layer-2 unmanaged 8-port Ethernet switch, with seven GigE channels supporting seven AMCs on the MicroTCA backplane and one GigE I/O uplink channel on the VCM faceplate. The on-board switch is a non-blocking, low-latency base channel switch. In cooperation with numerous third-party vendors of MicroTCA subsystem components, including chassis, connectors, backplanes, and power systems, the CorEdge VCM will be demonstrated in the 75mm, 150mm, and cube MicroTCA chassis. Future releases will support fat-pipe switching, IPMI (Intelligent Platform Management Interface) and other management features, and will conform to MicroTCA standards.

CorEdge Networks 1Gbps and 10Gbps Reprogrammable AdvancedMC (AMC)-CorEdge will demonstrate another industry first, its 10Gbps AMC. Both the 1Gbps and 10Gbps versions of the CorEdge AMC are based on its proprietary Communications Engine that serves as a high performance platform with programmable flexibility to support a variety of interfaces on the line side, mezzanine/chip-to-chip, and backplane side. The CorEdge Communications Engine enables a single solution to be configured to support multiple interfaces and to switch multiple protocols, depending on customer requirements. CorEdge will be demonstrating its low-latency, wire-speed 1GigE and 10GigE AMCs in its MicroTCA and ATCA systems.

CorEdge Networks ATCA Reprogrammable Cutaway Carrier Card-CorEdge will be demonstrating an improved version of its industry-first ATCA reprogrammable cutaway carrier card with additional IPMI support of the Shelf Manager and AMC modules. At AIW11 last week, CorEdge tested form, fit, initial power-up, and management functionality with third-party AMCs. At the show, CorEdge will demonstrate interoperability between its carrier card with third party and CorEdge AMCs. The CorEdge carrier card maximizes flexibility for ATCA applications by supporting multiple protocols, AMCs from multiple vendors, and multiple AMC form factors, including full or extended-height and single or double-width.

CorEdge Networks MicroTCA System-CorEdge will demonstrate the world's first single-port 10GigE and multi-port 1GigE MicroTCA prototype system. This prototype MicroTCA system will highlight the flexibility of MicroTCA and CorEdge products by integrating the CorEdge MicroTCA VCM, 1Gbps and 10Gbps AMCs into a prototype Ethernet switch.

CorEdge Networks 2U ATCA System-CorEdge will demonstrate a 2U, 2-slot, ATCA-based low-latency 16-port GigE switch. This system has two slots, with each slot populated with a CorEdge carrier card. One carrier card is configured to support third-party AMC processors and illustrate multi-vendor support by the CorEdge carrier card. One carrier card is configured to support four CorEdge AMCs, with each AMC configured to support four 1GigE ports. This Ethernet switch delivers less than 5 microsecond latency and offers AMC/ATCA capabilities in a compact, high-performance switch that is ideal for telecom and enterprise applications.

About CorEdge Networks

CorEdge Networks is a leading supplier of IP/chips, sub-system and system-level products. Through its dynamically programmable Multi-Protocol Communications Engine, Multi-Protocol Switch Fabric, and advanced digital and mixed-signal technologies, the company develops and markets networking products that enable high performance, scalable, flexible, reliable and cost-effective solutions for ATCA, MicroTCA, HPC and Data Center applications.

More information: www.coredgenetworks.com.


###


Copyright © 2005 by CorEdge Networks and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

Story Title: CorEdge Networks Demonstrates Major Advances in AMC, ATCE and MicroTCA Products and Systems at SUPERCOMM 2005
• REFERENCE KEYWORDS/TERMS: , , , , Networks and Encryption, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (CorEdge Networks); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Mon, 06 Jun 2005 15:16:00 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Networks and Encryption

Napatech Announces Fully Programmable Network Adapter

Author: Napatech
Dateline: Mon, 06 Jun 2005

freeNewsArticles Story Summary: “MOUNTAIN VIEW, Calif. - June 6 (SEND2PRESS NEWSWIRE) -- Napatech today announces the company's new fully programmable network adapter product line with the immediate availability of 4 x 1 Gb and 8 x 1 Gb network adapters. The Programmable Network Adapter product line contains the most powerful and the only fully programmable network adapters available on the market.”



A R T I C L E:

ARCHIVAL CONTENT

MOUNTAIN VIEW, Calif. - June 6 (SEND2PRESS NEWSWIRE) -- Napatech today announces the company's new fully programmable network adapter product line with the immediate availability of 4 x 1 Gb and 8 x 1 Gb network adapters.

The Programmable Network Adapter product line contains the most powerful and the only fully programmable network adapters available on the market today, allowing packet processing at up to 8 Gbps. The programmable network adapters are based on the industry-standard PCI-X interface and compliant with most platforms. The network adapter includes both Linux, FreeBSD and Windows XP drivers.

"The new programmable network adapters are based on our advanced FPGA platform and give our customers full flexibility on how to implement their applications. Beside the intelligent platform with well-defined blocks we provide the customers with the advanced tools and knowledge to develop Gigabit product with a very short time-to-market. The fully programmable platform provides both Napatech and our customers with the ability to rapidly and continuously add features and update the solutions in the field," says Thomas Jorgensen, co-founder and vice president of business development at Napatech.

"Our module-based architecture with well-defined interfaces has already shown its strength to our customers in traffic analyzer applications, allowing them the potential of using existing SW. By introducing the fully programmable network adapter we broaden our product scope and open the potential for other kind of applications. This could for instance be content switching applications or smart switches. In fact it is more up to our customers to define the use, we have just eased the way of implementation to various applications. We give our customers the ability to move their existing applications into HW and thereby accelerate the performance incredible."

Availability & Configurations

The Napatech Programmable Network Adapters are launched on the 6th of June 2005 during SuperComm exhibition in Chicago. Pricing information can be obtained directly from Napatech.

The Napatech Protocol Analysis products are immediately available through Napatech for OEM sales as are follows:

Ordering code Description

801-0016-01 4 x 1 Gb Electrical Network Adapter

801-0017-01 4 x 1 Gb Optical Network Adapter

801-0028-01 8 x 1 Gb Electrical Network Adapter

801-0029-01 8 x 1 Gb Optical Network Adapter

801-0032-01 4 x 1 Gb Electrical
and 4 x 1 Gb Optical Network Adapter

801-0054-01 Programmable development kit.

A development kit which provides the customer with a fully programmable development and test
platform. The development kit contains 1 PC installed with 1 8-port network adapter,
Linux driver (including source code) and custom application examples plus
one extra Programmable network adapter. Furthermore documenttation
and 3 days training is included.

About Napatech

Napatech is focus on programmable and intelligent Ethernet adapters. The core idea is off-loading real-time/streaming Protocol and payload analysis and control applications traditionally implemented in software or proprietary hardware. Napatech expects a huge growth in the demand for intelligent and programmable adapters as Ethernet speeds increase. The current PC architecture limits the amount of bandwidth that can be handled by the PCI bus and CPU/memory. Napatech offers its products to OEM customers. Napatech has marketing and R&D offices in Mountain View, California and Copenhagen, Denmark.

More information: www.napatech.com.

###


Copyright © 2005 by Napatech and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

Story Title: Napatech Announces Fully Programmable Network Adapter
• REFERENCE KEYWORDS/TERMS: , , , , Networks and Encryption, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (Napatech); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Mon, 06 Jun 2005 11:16:00 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Networks and Encryption

TeamF1’s Air Secure Access Point (ASAP) Software Extends Secure Wireless Capabilities to Embedded Devices

Author: TeamF1, Inc.
Dateline: Wed, 18 May 2005

freeNewsArticles Story Summary: “FREMONT, Calif.- May 18 (SEND2PRESS NEWSWIRE) -- TeamF1, Inc. (www.TeamF1.com), the high-performance embedded networking and security software company, today introduced Air Secure Access Point (ASAP), the industry's first middleware product specifically designed to add secure wireless access-point functionality to embedded devices. A comprehensive, secure, managed access point solution, ASAP sets a new standard by providing the ability to concurrently support many different generations of 802.11 security technology found in today's wireless networks -- from WEP through WPA, up to WPA2/ 802.11i, in either Personal (Pre-shared Key) or Enterprise (802.1X) modes.”



A R T I C L E:

Flexible, highly-customizable, standards-compliant software from embedded security leader makes wireless connectivity easier and more secure

FREMONT, Calif.- May 18 (SEND2PRESS NEWSWIRE) -- TeamF1, Inc. (www.TeamF1.com), the high-performance embedded networking and security software company, today introduced Air Secure Access Point (ASAP), the industry's first middleware product specifically designed to add secure wireless access-point functionality to embedded devices. A comprehensive, secure, managed access point solution, ASAP sets a new standard by providing the ability to concurrently support many different generations of 802.11 security technology found in today's wireless networks -- from WEP through WPA, up to WPA2/ 802.11i, in either Personal (Pre-shared Key) or Enterprise (802.1X) modes.

New applications for wireless technologies in the embedded space are fueling the demand for standardized middleware running on popular device operating systems. However, despite its enormous benefits and convenience, wireless technology is traditionally perceived to be insecure and vulnerable. With ASAP, TeamF1 brings its proven expertise in embedded security to the wireless arena. ASAP builds on TeamF1's security frameworks widely adopted by OEMs today as a part of TeamF1's popular embedded security software family, to deliver a comprehensive package enabling a whole new class of connected device applications.

"As untethered computing comes of age and devices unfettered by wires span various embedded application domains beyond standard LAN access for PCs, security is starting to take center-stage," said Mukesh Lulla, President of TeamF1. "We expect ASAP to promote extensive adoption of wireless technologies in embedded applications by increasing our customers' confidence in wireless security. OEMs and ODMs can now rely on a standards-based and integrated platform to harness the benefits of embedded wireless functionality and leverage the Wi-Fi(R) infrastructure that is becoming commonplace."

ASAP is a comprehensive solution for networked devices that require secure access point functionality. It integrates the latest wireless standards and security technologies with a flexible driver framework and includes reference drivers that work with a variety of 802.11 and Wi-Fi(R) devices. ASAP's rich features are exclusively designed for stringent embedded requirements, and include the most-advanced wireless security protection on the market including AES encryption and 802.11i.

ASAP includes Krypto-Lite, TeamF1's FIPS-certified common crypto framework, along with a suite of encryption and integrity components to secure and manage access point traffic. Krypto-Lite also allows the seamless integration of other optional security protocols developed by TeamF1 such as SSL/https, SSH and IPsec/IKE to meet additional security requirements.

ASAP is designed to run in embedded environments and has been extensively validated on a variety of CPU architectures. Optimized editions for VxWorks(R) and Linux(R) are available with support for native OS network driver models, enhanced memory management, and seamless integration with other OS features.

Availability

ASAP is immediately available as a source license directly from TeamF1. Full source code and royalty-free terms are available. Professional services for application-specific customization, turn-key integration and certifications for ASAP are also available from TeamF1 and its partners.

About TeamF1

TeamF1, Inc. a privately held corporation headquartered in Fremont, CA, is a leader in high performance embedded networking and security software. Founded in 1996, TeamF1's products enable secure management of telecom/datacom and industrial equipment, and provide the infrastructure components needed for switching and wireless products in various market segments.

For more information visit the company's website at http://www.TeamF1.com or contact TeamF1 Public Relations at 510/505-9931 or email pr _at_ TeamF1.com.

###


Copyright © 2005 by TeamF1, Inc. and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

Story Title: TeamF1's Air Secure Access Point (ASAP) Software Extends Secure Wireless Capabilities to Embedded Devices
• REFERENCE KEYWORDS/TERMS: , , , , Networks and Encryption, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (TeamF1, Inc.); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Wed, 18 May 2005 10:25:00 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Networks and Encryption

TeamF1 Launches Upgraded Embedded Kerberos Agent

Author: TeamF1, Inc.
Dateline: Tue, 12 Apr 2005

freeNewsArticles Story Summary: “FREMONT, Calif. -- (SEND2PRESS NEWSWIRE) -- TeamF1, Inc. (www.TeamF1.com), the high-performance embedded networking and security software company, today released a new version of AuthAgent Kerberos, its standards-based implementation of the Kerberos(TM) V Protocol (RFC 1510) for authentication of network clients and services in embedded devices.”



A R T I C L E:

PacketCable(TM) Compliance, PKINIT, AES and IPv6 Support Top List Of New Features

FREMONT, Calif. -- (SEND2PRESS NEWSWIRE) -- TeamF1, Inc. (www.TeamF1.com), the high-performance embedded networking and security software company, today released a new version of AuthAgent Kerberos, its standards-based implementation of the Kerberos(TM) V Protocol (RFC 1510) for authentication of network clients and services in embedded devices.

AuthAgent Kerberos 2.0's newest features include an implementation of a Federal Information Processing Standards (FIPS) certified version of the Advanced Encryption Standard (AES) algorithm, IPv6 support, support for memory-based credential caching, and an enhanced Yarrow-based PRNG. When combined with TeamF1's AuthAgent X.509 for digital certificate authentication, the product's built-in support for certificate based initial authentication (PKINIT) and opaque subkey material enable compliance with the security requirements of the PacketCable(TM) specification.

"This upgrade underscores our continuing commitment to help promote evolving security standards in the embedded space," said Mukesh Lulla, President, TeamF1. "We strive to deliver a comprehensive and modular feature-rich security platform for embedded devices that enables our customers to focus on their own competitive differentiators without investing significant resources on keeping up with security standards."


About AuthAgent Kerberos 2.0

First made available to the embedded market in early 2003, AuthAgent Kerberos has been one of the company's leading solutions for avoiding the dangers of transmitting plain-text authentication information by providing secure authentication in networked environments. AuthAgent Kerberos can be used as a standalone authentication agent and is also pre-integrated with TeamF1's network security protocol implementations including SSH and IPsec/IKE.

AuthAgent Kerberos finds use in the authentication of embedded devices such as workgroup routers and printers, networking and storage equipment, and remotely managed industrial control applications that require secure authentication, single sign-on capabilities and compatibility with enterprise Windows(R) and UNIX(R) authentication servers. With the enhanced features added in the new release, AuthAgent Kerberos can now also be used in various datacom & telecom infrastructure devices that require security for MTA/CMS interfaces, PacketCable compliance, smart-card authentication or use of FIPS-approved algorithms.


Availability

AuthAgent Kerberos 2.0 is available as a source license under royalty-free terms directly from TeamF1 with immediate availability on Wind River's VxWorks (R) operating system and VxWorks-based Platforms, with an edition for embedded Linux to be released shortly.

In keeping with TeamF1's goal of protecting its customers' investment in its technology, this upgrade is provided at no additional cost to all customers under current maintenance agreements.


About TeamF1

TeamF1, Inc. a privately held corporation headquartered in Fremont, CA, is a leader in high performance embedded networking and security software. Founded in 1996, TeamF1's products enable secure management of telecom/datacom and industrial equipment, and provide the infrastructure components needed for switching and wireless products in various market segments.

For more information visit the company's website at www.TeamF1.com or contact TeamF1 Public Relations at 510/505-9931 or email pr _at_ TeamF1.com.

###


Copyright © 2005 by TeamF1, Inc. and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

Story Title: TeamF1 Launches Upgraded Embedded Kerberos Agent
• REFERENCE KEYWORDS/TERMS: , , , , Networks and Encryption, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (TeamF1, Inc.); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Tue, 12 Apr 2005 10:26:00 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Networks and Encryption

TeamF1 Unveils Upgraded Networking and Security Software Components for Infrastructure Equipment OEMs

Author: TeamF1, Inc.
Dateline: Wed, 30 Mar 2005

freeNewsArticles Story Summary: “FREMONT, Calif. /Send2Press Newswire/ -- TeamF1, Inc. (www.TeamF1.com), the high-performance embedded networking and security software company, today announced significant upgrades to its networking and security software components, continuing its tradition of bringing innovative and performance-leading software technology to the embedded device market.”



A R T I C L E:

FREMONT, Calif. /Send2Press Newswire/ -- TeamF1, Inc. (www.TeamF1.com), the high-performance embedded networking and security software company, today announced significant upgrades to its networking and security software components, continuing its tradition of bringing innovative and performance-leading software technology to the embedded device market.

* Multi-Class / Multi-Link PPP with strong authentication, compression and encryption

* Network Address Translator (NAT) with advanced proxies, auto port selection and round-robin redirects

* Firewall with stateful inspection, anti-spoofing and rule-grouping

* Alternate Queuing Disciplines with enhanced framework and Denial-of-Service mitigation.



The technologies being announced include:

* GrandPPPrix 2.0 - an advanced embedded implementation of the Point-to-Point Protocol (PPP), Multi-Link PPP (MP), and Multi-Class Extensions to MP (MCMP), with support for multiple network stack instances, IPv6, encryption, compression and call-back control.

* Internet Software Extensions for Classification and Traffic Shaping (INSECTS) Suite Version 2.0, a family of software components comprising the GNAT Network Address Translator, FireFly Packet Filtering Firewall, and ClassHopper Alternate Queuing Disciplines.

"These significant upgrades to the rich features of our existing products show that TeamF1's commitment to customers doesn't stop at providing quality protocol implementations," said TeamF1 President Mukesh Lulla. "We continue to build on that innovation and deliver revolutionary new technologies specifically targeted to the needs of infrastructure OEMs and enable our customers to future-proof their own product roadmap. In these product upgrades, we have added a number of new features aimed at improving security, performance and functionality, as well as support for key new standards such as those used in BTS/BSC/RNC and other IP backhaul applications."

GrandPPPrix Revs up PPP engines

TeamF1's GrandPPPrix is an advanced embedded implementation of Multi-Class / Multi-Link PPP, including PPP over Ethernet (PPPoE). GrandPPPrix now features bandwidth aggregation of PPP links to provide greater throughput for applications such as aggregating T1/E1 bandwidth in mobile or backhaul applications. With support for compression, prioritization, call-back control and link quality monitoring, it enables high performance even in constrained embedded environments. GrandPPPrix also provides secure connections using MPPE and authentication using PAP, CHAP, MS-CHAP and EAP.

No packets lost in network translation with GNAT's new proxies

TeamF1's GNAT is a high performance network address translator for private addressing schemes. The upgraded version supports more "ALGs" (Application Level Gateways) including proxies for multimedia streams, DGM packets, passive FTP servers and other applications, while still maintaining a tiny memory footprint. It also adds support for automatic or explicit port selection, round-robin redirect rules, and several other enhancements related to flexible and fine-grain control of policy settings.

Add on-the-fly stateful inspection with FireFly

FireFly, a rules-based packet filtering firewall with dynamic capabilities, now delivers stateful inspection which allows easy and flexible creation of adaptive firewall filtering rules for specific flows when packets that match a given pattern are detected. Enhanced support for grouping rules into sets, anti-spoofing protection and an extended range of filtering criteria are a few of the many other enhancements introduced in this upgrade.

ClassHopper adds a touch of class to PPP and IP stacks

The alternate queuing discipline framework in ClassHopper now features enhanced classification mechanisms including support for layer 2 tags, policy support to mitigate Denial-of-Service attacks, and a framework for CBQ (Class-Based-Queue) derived disciplines. When combined with GrandPPPrix PPP, ClassHopper can be configured to add traffic-shaping capabilities to Multi-Class/Multi-Link PPP traffic so that delays for higher priority packets are minimized while not abating lower priority traffic.

Availability

GrandPPPrix (PPP), GNAT (Network address translator), FireFly (firewall), and ClassHopper (Alternate Queues) are available individually or as a bundle directly from TeamF1 with immediate availability on Wind River System's VxWorks(r) 5.x and AE operating systems, Wind River's VxWorks-based Platforms such as Platform CD and NE, and other embedded OSes. Full source code and royalty-free terms are available. TeamF1's professional services team also provides solutions for application-specific customization and turn-key integration and security policy guidance related to these products.

The upgrades are provided at no additional cost to all customers under current maintenance agreements.

About TeamF1

TeamF1, Inc. a privately held corporation headquartered in Fremont, CA, is a leader in high performance embedded networking and security software. Founded in 1996, TeamF1's products enable secure management of telecom/datacom and industrial equipment, and provide the infrastructure components needed for switching and wireless products in various market segments.

For more information visit the company's website at www.TeamF1.com or contact TeamF1 Public Relations at 510/505-9931 or email email pr _at_ TeamF1.com.


###


Copyright © 2005 by TeamF1, Inc. and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

Story Title: TeamF1 Unveils Upgraded Networking and Security Software Components for Infrastructure Equipment OEMs
• REFERENCE KEYWORDS/TERMS: , , , , Networks and Encryption, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (TeamF1, Inc.); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Wed, 30 Mar 2005 10:27:00 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Networks and Encryption

TeamF1’s High Performance V-IPSecure Software Supports Cavium Networks’ NITROX(tm) Security Processor Family

Author: TeamF1, Inc.
Dateline: Tue, 22 Mar 2005

freeNewsArticles Story Summary: “FREMONT, Calif. /Send2Press Newswire/ -- TeamF1, Inc. (www.TeamF1.com), the high-performance embedded networking and security software company, today announced optimized support for Cavium Networks' NITROX family of security processors in the latest version of its V-IPSecure embedded IPsec/IKE software.”



A R T I C L E:

Hardware Accelerated IPsec/IKE software offering brings gigabit wire-speed to traditionally performance constrained embedded devices

FREMONT, Calif. /Send2Press Newswire/ -- TeamF1, Inc. (www.TeamF1.com), the high-performance embedded networking and security software company, today announced optimized support for Cavium Networks' NITROX family of security processors in the latest version of its V-IPSecure embedded IPsec/IKE software.



This tight integration of TeamF1's full-featured IPsec/IKE software suite with Cavium's award-winning processors enables OEMs to achieve wire-speed performance that scales up to multi-gigabit speeds. Optimized drivers that leverage the performance of the NITROX family on leading embedded operating systems such as VxWorks(r) and Linux, together with a software architecture designed for hardware acceleration, enable customers to meet performance goals even in constrained embedded environments.

"With increasing network speeds going up against CPU-intensive security requirements, customers are demanding hardware acceleration for the data-plane in connected embedded devices," said Vinai Kolli, Vice-President of Engineering at TeamF1. "By teaming up with Cavium to provide a seamless solution, we seek to empower our mutual customers with the ability to secure their infrastructure devices without having to compromise on performance."

"Cavium Networks' NITROX family is the industry leading security processing family with the highest performance, scalability, flexibility and multi-protocol support. It provides 50 Mbps - 10 Gbps of performance for IPsec, SSL, WLAN and multi-protocol security" said Rajneesh Gaur, Director, Product Marketing at Cavium Networks. "We are pleased that our partnership with TeamF1 has resulted in an optimized VxWorks(r) and Linux based solution for our customers."

About V-IPSecure

TeamF1's V-IPSecure is a high-performance, lean and flexible implementation of the IPsec protocol, including support for leading-edge features such as IPv6, IKEv2, NAT-T, FIPS-certified cryptography and PacketCable compliance. TeamF1 also supplies a choice of authentication implementations for IKE ranging from pre-shared keys and XAUTH to Kerberos/PKINIT and digital certificates.

Availability

V-IPSecure is licensed as a royalty-free source code license and is available with support for Cavium Networks' NITROX on Wind River System's VxWorks(r) operating systems and VxWorks-based Platforms such as Platform CD and NE, as well as on embedded Linux distributions including MontaVista(tm) Linux.


About TeamF1

TeamF1, Inc. a privately held corporation headquartered in Fremont, CA, is a leader in high performance embedded networking and security software. Founded in 1996, TeamF1's products enable secure management of telecom/datacom and industrial equipment, and provide the infrastructure components needed for switching and wireless products in various market segments.

For more information visit the company's website at http://www.TeamF1.com or contact TeamF1 Public Relations at 510/505-9931 or email pr _at_ TeamF1.com.


About Cavium Networks

Cavium Networks is a worldwide leader in security, network services and content processing semiconductor solutions. Cavium Networks' award-winning NITROX and MIPS64-based OCTEON families of processors and accelerator boards offer flexible, scalable and highly-integrated solutions delivering 50Mbps to 10Gbps performance. The company's products are integrated into a wide range of networking equipment that include routers, gateways, network appliances, content switches, wireless LAN access/aggregation points, servers and storage networking devices.

Cavium Networks is headquartered in the heart of Silicon Valley in Santa Clara, CA with development centers in Marlboro, MA and Hyderabad, India. For more information, please visit: www.cavium.com
.


###


Copyright © 2005 by TeamF1, Inc. and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

Story Title: TeamF1's High Performance V-IPSecure Software Supports Cavium Networks' NITROX(tm) Security Processor Family
• REFERENCE KEYWORDS/TERMS: , , , , Networks and Encryption, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (TeamF1, Inc.); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Tue, 22 Mar 2005 10:55:00 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Networks and Encryption

CorEdge Networks To Demonstrate Industry’s First AdvancedTCA-Compliant Cutaway Carrier Card

Author: CorEdge Networks
Dateline: Tue, 08 Mar 2005

freeNewsArticles Story Summary: “SAN RAMON, Calif. /Send2Press Newswire/ -- CorEdge Networks, Inc. designs, develops, manufactures, markets and supports network switching equipment; over $30M has been invested since 2000 by private equity investors to develop CorEdge technology and products. CorEdge will be demonstrating a working prototype of its AdvancedTCA-compliant cutaway carrier card at the PICMG (PCI Industrial Computer Manufacturers Group) pavilion (booth #657) at the CTIA Wireless 2005 trade show in New Orleans on March 14-16, 2005 at the Ernet N. Morial Convention center.”



A R T I C L E:

SAN RAMON, Calif. /Send2Press Newswire/ -- CorEdge Networks, Inc. designs, develops, manufactures, markets and supports network switching equipment; over $30M has been invested since 2000 by private equity investors to develop CorEdge technology and products. CorEdge will be demonstrating a working prototype of its AdvancedTCA-compliant cutaway carrier card at the PICMG (PCI Industrial Computer Manufacturers Group) pavilion (booth #657) at the CTIA Wireless 2005 trade show in New Orleans on March 14-16, 2005 at the Ernet N. Morial Convention center.

The cutaway carrier card, which will be bundled with CorEdge's prototype Advanced Mezzanine Card (AMC) in a third-party ATCA chassis, will demonstrate a fully ATCA-compliant AMC-to-AMC Ethernet networking switch.

The CorEdge initial demonstration of the cutaway carrier card will incorporate switching that supports AMC.0 (form factor). Future releases of the carrier card will support AMC.1 (PCI-Express) and AMC.2 (Ethernet) and will support up to four AMCs. In contrast to other carrier cards, CorEdge's solution supports single-width, full extended-height AMCs.

CorEdge's cutaway carrier card is designed to work with any vendor's ATCA-compliant AMCs. In support of PICMG's standards-based approach, CorEdge Networks will also participate in the CTIA AIW (ATCA Interoperability Workshop) the week prior to the show, to test and ensure mechanical interoperability with third party AMC and ATCA components. CorEdge is actively engaging with third party vendors to develop modular ATCA and AMC-based solutions as well as seeking additional relationships.

"We are pleased to be able to support PICMG in the realization of the ATCA standard, by filling what up until now has been a major critical path item in the road to commercialization. When we began designing our solution, we had intended to use it as part of our own broader systems-level product. However, when we began to realize the extent of the product availability gap, we decided to make our designs available commercially. We welcome talking with ATCA vendors about our AMC and carrier cards and how we can work together to move ATCA ahead," said William Chu, President of CorEdge.

About CorEdge Networks

CorEdge Networks is a leading supplier of IP/chips, sub-system and system-level products. Through its dynamically programmable Multi-Protocol Communications Engine, Multi-Protocol Switch Fabric, and advanced digital and mixed-signal technologies, the company develops and markets networking products that enable high performance, scalable, flexible, reliable and cost-effective solutions for ATCA, HPC and data center applications. www.coredgenetworks.com.


###


Copyright © 2005 by CorEdge Networks and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

Story Title: CorEdge Networks To Demonstrate Industry's First AdvancedTCA-Compliant Cutaway Carrier Card
• REFERENCE KEYWORDS/TERMS: , , , , Networks and Encryption, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (CorEdge Networks); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Tue, 08 Mar 2005 12:20:00 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.
Networks and Encryption

AcXess Inc. Announces Affordable Business Continuity Solution for Citrix(R) Customers

Author: AcXess Inc.
Dateline: Mon, 17 Jan 2005

freeNewsArticles Story Summary: “ORLANDO, Fla. /Send2Press Newswire/ -- Today at Solution Summit(R), a meeting of over 2000 Citrix(R) partners, value added resellers and customers, AcXess(R) Incorporated announced the first ever Business Continuity Service Solution built exclusively around the Citrix Access Infrastructure(tm) platform. The AcXess Solution(R) makes rapid business & IT recovery easy and affordable for mid-market firms. In the event of a disruption to its Citrix environment, AcXess Solution customers can be fully operational in hours, instead of days or weeks.”



A R T I C L E:

First BC Service Solution Built exclusively on Citrix Technology Puts Rapid Disaster Recovery Within the Reach of Mid-market Firms

ORLANDO, Fla. /Send2Press Newswire/ -- Today at Solution Summit(R), a meeting of over 2000 Citrix(R) partners, value added resellers and customers, AcXess(R) Incorporated announced the first ever Business Continuity Service Solution built exclusively around the Citrix Access Infrastructure(tm) platform.

The AcXess Solution(R) makes rapid business & IT recovery easy and affordable for mid-market firms. In the event of a disruption to its Citrix environment, AcXess Solution customers can be fully operational in hours, instead of days or weeks.

"There is a pressing need for an affordable business continuity solution for the Fortune 5000-sized enterprise. Until today, these firms were forced to choose between providers they could not afford, or the risk of operating without a rapid recovery solution," stated Tom Elowson, the company's President.

"The Citrix platform is the key ingredient to our offering that enables us to bring cost-efficient rapid IT recovery to customers with 500 to 5000 employees."

Companies of all sizes are dependent on their IT infrastructure to operate. Simply put, businesses can no longer afford downtime with their information technology. All of IT has become mission critical. Unfortunately, the cost of ensuring business continuity has been beyond the reach of most mid-market firms.

By combining its proprietary technology and robust, high-availability infrastructure with the strength and efficiency of the proven Citrix Access Infrastructure platform, the AcXess Solution ensures rapid business recovery and continuity at a cost that medium-sized firms can now afford.

Citrix's Chief Evangelist, Traver Gruen-Kennedy, stated, "Business Continuity is essential in enterprise IT today. Business requirements drive it, new financial governance and regulatory reforms mandate it. AcXess is our alliance partner in delivering BC services using the cost-efficient Citrix Access Infrastructure Solution, making the on-demand enterprise resilient in the face of disruption."


About AcXess Incorporated

AcXess Inc., based in Boca Raton, FL, is the founding provider of business continuity solutions for companies that utilize Citrix products. The AcXess Solution allows mid-market companies to meet the mission critical demands of today's customers, partners, vendors and extended business environment. For more information is available at www.acxess.us, via email at info@acxess.us or by calling 800-680-1360.

For more information about Citrix Systems' product line, please visit: http://www.citrix.com

SOLUTION SUMMIT(R) AND CITRIX(R) are registered trademarks of Citrix Systems, Inc. AcXess(R) and AcXess Solution(R) are registered trademarks of AcXess Inc. Other products or services may be the trademarks of their respective owners.

###


Copyright © 2005 by AcXess Inc. and Send2Press® Newswire, a service of Neotrope® - all rights reserved. Information believed accurate but not guaranteed. Sourced on: freeNewsArticles.com.

Story Title: AcXess Inc. Announces Affordable Business Continuity Solution for Citrix(R) Customers
• REFERENCE KEYWORDS/TERMS: , , , , Networks and Encryption, , , .

IMPORTANT NOTICE: some content which is considered "old" or "archival" may reference an event which has already occurred; some content possibly considered "advertorial" may also reference a promotion or time-limited/sensitive offering, and in all of these instances certain material may no longer be valid. For notably stale content, you should directly contact the company/person mentioned in the text (AcXess Inc.); this site cannot assist you with information about products/services mentioned in the news article, nor handle any complaints or other issues related to any person/company mentioned or promoted in the above text. Information believed accurate but not guaranteed as of original date of story [Mon, 17 Jan 2005 12:19:00 GMT].

USE THIS CONTENT FOR FREE: To use this content in your newspaper, broadcast outlet, news portal, blog/ezine or similar, free of cost, CLICK HERE to learn how.